Used forging press

- 357 listings found
Sort by Price: Low to High | High to Low
  • 100 TON WILKINS & MITCHELL HOT FORGING PRESS

        Rebuilt and retrofit 2017 to hot forge bolt tonnage 100tons capacity m42 dia length 800 stroke 8" spm 45 shutheight 24" bed area 30" (front to back) 40" (left to right) equipped w...

        No price
        Newark, NJ, USA
      • 700 TON NATIONAL MAXIPRESS FORGING PRESS

        • Manufacturer: National
        • Stroke: 8"

        700 ton national maxipress spm .................. 90 stroke ............... 8" shut height .......... 21-9/16" - 22" tie rod dia. ......... 6-3/4" floor space .......... rl 8'11" fb 8'6" h...

        No price
        Newark, NJ, USA
      • ZTS LE-250

        • Manufacturer: ZTS
        • Capacity: 250.00 ton 2491 kN

        Height listed is above floor total height is 142 inches (3610 mm)

        No price
        Washington, PA, USA
      • 1984 ZTS LE-400 Gap / C Frame Cold Press

        • Manufacturer: ZTS
        • Capacity: 400.00 ton 3985 kN
        • Stroke: 6.30 in 160.00 mm

        Throat size 18 inch (450mm), height shown is above floor level, number of strokes admitted per minute 20

        No price
        Washington, PA, USA
      • Hydraulic Press Manufacturing Co 10018

        • Manufacturer: Rexroth
        • Stroke: 1,000 mm

        press daylight: 2,489 mm | total power supply: 2,764 kw | normal press stroke: 1,000 mm | hydraulic pumps (main): axial piston pump x 8 set | advance speed - fast/slow: 250/10 mm/s | hydraulic pumps total flow: ...

        No price
        Marietta, GA, USA
      • 1983 Aida CFT-60 600-Ton Cold Forging Press DANA00000453

        • Manufacturer: Aida

          Open time: 12 july 2017 12:00 am et / close time: 28 december 2017 05:00 pm et 1983 aida cft-60 600-ton cold forging press. serial number: 16100-0017. dim: 117 w x 6060mm l x 6390mm. h. stroke 250"". est. weight ...

          No price
          Querétaro, Mexico
        • 10462

          • Manufacturer: SEC
          • Stroke: 1,500 mm

          Tool shifting device – stroke 4,000 mm / 157.5″ top die clamping device – 20 ton die magazine device – stroke 3,300 mm / 130″

          No price
          Marietta, GA, USA
        • Lasco VPE 1000 Closed die forging presses

          • Manufacturer: Lasco
          • Capacity: 1000 t
          • Stroke: 800 mm

          stroke: 800 mm | daylight: 1850 mm | return speed: 400 mm/sec | lower ejector: 100 t | upper ejector: 100 mm/sec | press capacity: 1000 t | mode of operation: oil hydraulic | ram (front to back): 1400 mm | ram (...

          No price
          Reinach, Switzerland
        • Lasco SPR 1000 Closed die forging presses

          • Manufacturer: Lasco
          • Stroke: 500 mm

          stroke: 500 mm | dimensions: 6710 x 2190 x 2520 mm | total weight: 84 t | mode of operation: mechanical | ram (front to back): 1000 mm | ram (left to right): 880 mm | table size (front to back): 1000 mm | table ...

          No price
          Reinach, Switzerland
        • Schloemann Hydraulic forging press

          • Manufacturer: Schloemann
          • Stroke: 1000

          Moving table pot., tone: 3500 | stroke max, mm: 1000 | diam. main cylinder, mm: 1200 | distance between columns, mm: 2000-1500 | max distance between hummer - table, mm: 2200

          No price
          Veneto, Italy