• Müller double-column pressemüller double-column pressemüller double-column pressemüller double-column presse

    • Manufacturer: Mueller

      63 to. frame press constr. müller year 1979 table: 630 x 490 mm ram: 560 x 450 mm mounting height: 400 mm stroke approx. 150mm press force 630 kn

      No price
      Germany
    • 1998 STENHOJ LP 60 T

      • Manufacturer: STENHOJ

        stroke: 400 mm | dayligth: 600 mm | pressure: 60 t | frame depth: 480 mm | frame width: 1650 mm | frame height: 2660 mm | delivery time: by arrangement | type of control: conventional | country of origin: unknow...

        No price
        Schmölln, Germany
      • 2001 STENHOJ LPA 40

        • Manufacturer: STENHOJ

          stroke: 400 mm | dayligth: 500 mm | pressure: 40 t | pave width: 1000 mm | frame depth: 440 mm | frame width: 1400 mm | slide plate: ca. 500 x 300 mm | frame height: 2460 mm | delivery time: by arrangement | fre...

          No price
          Schmölln, Germany
        • Quiri 150 ton Dish end forming press H-frame presses

          • Manufacturer: Quiri 150 ton
          • Capacity: 150 Ton
          • Stroke: 500 mm

          machine height: 4200 mm (600mm in floor) machine width: 3000 mm  machine depth: 600 mm  equipped with indexable turning head  plate roll press - plate roller press - plattenroll presse - strechting - bending -...

          No price
          Deinze, Belgium
        • Bauer 400 ton Dish end forming press H-frame presses

          • Manufacturer: Bauer
          • Capacity: 400 ton
          • Stroke: 600 mm

          this portalpress is suitable for all shipbuilding activities relative to the deformation/deforming of steel plates. for the width and thickness of the plates the general rule applies: 10 ton per mm platethickness...

          No price
          Deinze, Belgium
        • Sip 6000 ton rubber pad press H-frame presses

          • Manufacturer: SIP
          • Capacity: 6000 ton

          ideal for automotive parts, deepdraw parts in limited numbers: simple tooling automatic feed in & out table 2 hydraulic cilinders each with a diameter of 1000 mm used as rubber die press, but can also be used for...

          No price
          Deinze, Belgium
        • Sip 6000 ton rubber pad press H-frame drawing presses

          • Manufacturer: SIP
          • Capacity: 6000 ton
          • Stroke: 250 mm

          ideal for automotive parts, deepdraw parts in limited numbers: simple tooling automatic feed in & out table 2 hydraulic cilinders each with a diameter of 1000 mm used as rubber die press, but can also be used for...

          No price
          Deinze, Belgium
        • Bakker 500 ton Dish end forming press H-frame presses

          • Manufacturer: Bakker 500 ton
          • Capacity: 500 ton
          • Stroke: 600 mm

          type: hspp 50 2000 mm in ground closing speed + pressing speed: 850 mm/min return speed: 5500 mm/min also fitted with a jib crane and two tables are included max open: 2700 mm (without table) can be transpor...

          No price
          Deinze, Belgium
        • Favrin 100 ton Plateroll / Dish end forming H-frame presses

          • Manufacturer: Favrin 100 ton
          • Capacity: 100 Ton

          ideal for deformation of steel plates for ships. the yield point of a plate is overloaded to create a permanent deformation and to take away the shrinkage stress in the edges of the plate caused by flame cutting....

          No price
          Deinze, Belgium
        • ZM 50 ton Open gap straightening presses

          • Manufacturer: ZM
          • Capacity: 50 Ton

          presse à émmanchement hydraulique à coulisse height: 4000 kg | command: 150 mm | capacity: 50 ton | length l -- r: 2250 mm | depth fw -- bw: 3850 mm | tension needed: 900 mm | depth of throat: 900 mm | frame incl...

          No price
          Deinze, Belgium