Used geared drill

- 141 listings found
Sort by Price: Low to High | High to Low
  • 24" Willis Geared Head Drill

        24" willis model se2035 geared head drill; 18" x 22" table, speeds to 3,610 rpm

        No price
        Cincinnati, OH, USA
      • 24" Solberga Geared Head Drill Press

        • Manufacturer: Solberga
        • Capacity: 1.75"

        motor: 2-hp | spindle travel: 7.785" | depth of throat: 13" | spindle diameter: 3.125" | spindle feeds (4): .004/.008/.012/.016 ipr | spindle speeds (8): 48-1584 rpm | distance spindle to base: 35" - 49.5" | ver...

        No price
        Farmingdale, NY, USA
      • 25” Doall Geared Head Drill with Power Down Feed

        • Manufacturer: Doall

          Machine specs: column diameter 5” column to spindle center 12-1/2” table size 17” x 21” spindle speeds (8) 85 - 1460 rpm spindle hp 1.0/1.2 2 hp / 2 speed 440 volt 3 phase spindle taper 3 mt feeds .015, .010, .00...

          $2,950 (USD)
          Livingston, NJ, USA
        • 2 SPDL, Edlund, No. 2F12, 24" swing, 3 Hp and 1 1/2 HP geared heads, PDF., #3 MT, Coolant

              One used edlund boxed column dual spindle drill press model: 2f12 throat depth to column: 13.5” distance between spindles: 12” spindle tapers: #3 mt left spindle: 3 hp/1730 rpm, with power down feed: .0015”, .002...

              No price
              Lake Villa, IL, USA
            • 24", ARBOGA, #GL2508, 1-1/4" cap., geared, #3MT, 16" x 20" tbl., manua

              • Manufacturer: Arboga

                Specifications: drilling capacity--mild steel 1-1/4" --cast iron 1-1/2" distance from spindle center to column 12" spindle speeds--number 8 --range 125-3480 rpm spindle taper #3mt spindle diameter 2-3/8" maximum ...

                No price
                Hialeah, FL, USA
              • 26", WILTON/ARBOGA, #A4008M, geared, #4MT, 9.5" x 23" X-Y tbl., auto feed,

                • Manufacturer: Wilton

                  Specifications: drilling capacity--mild steel 1-7/8" --cast iron 2-1/8" tapping capacity--mild steel 1" --cast iron 1-1/4" distance from spindle center to column 13" spindle speeds--number 8 --range 108-1800 rpm ...

                  No price
                  Hialeah, FL, USA
                • Barnes Upright Geared Head Drilling Machine

                  • Manufacturer: Up-Right

                    main motor: hp. 7-1/2 | table size: 17" x27" | coolant pump: yes | spindle feeds: .005 to .062 ipr | spindle taper: # 5 morse | condition info: very good | spindle speeds: 5 to 850 rpm's | spindle diameter: 2-1/...

                    No price
                    Navasota, TX, USA
                  • 2HP Spindle Clausing BF35 DRILL PRESS

                    • Manufacturer: Clausing
                    • Capacity: 1.80"

                    New clausing/ibarmia prismatic column drill mill/drill, geared-head, 30 taper model: bf35 specifications: spindle taper: iso-30 optional spindle taper (on request): 4mt quill diameter: 2.95" spindle travel (drill...

                    $58,540 (USD)
                    Harrison, NJ, USA
                  • 2HP Spindle Clausing BF35RS DRILL PRESS

                    • Manufacturer: Clausing
                    • Capacity: 1.80"

                    New clausing/ibarmia prismatic column drill mill/drill, geared-head, 30 taper w/automatic feed reversing system for tapping model: bf35rs specifications: spindle taper: iso-30 optional spindle taper (on request):...

                    $59,500 (USD)
                    Harrison, NJ, USA
                  • JOHANSSON SINGLE SPINDLE

                    • Manufacturer: JOHANSSON

                      Geared head 16 spindle speeds 36-900 rpm ******#5 mt in spindle********* 6" spindle travel spindle feed ***variable 0.00-.320 per rev. tapping cycle 6" spindle travel 16" head travel (up/down) 16" knee travel (up...

                      No price
                      Cleveland, OH, USA