• Mekifasa EF2-HS DSSD Cold Headers 21025

    No price - Rockville Centre, NY, USA Recently Added
    • Manufacturer: PPM

    double stroke solid die cold header with bushing cutoff. available for inspection under power and immediate delivery.

  • Sakamura CO-8 DSSD Cold Headers 24125

    No price - Rockville Centre, NY, USA Recently Added
    • Manufacturer: Sakamura

    still installed, this heading machine has been well maintained after being fully rebuilt in the early 1990's. it comes complete with the following: four (4) feed roll design heavy duty power uncoil...

  • NATIONAL-KAYSER M# M12LS LONG STROKE DSSD COLD HEADER

    No price - Newark, NJ, USA
    • Manufacturer: National
    • Weight: 12,700 Kg

    national mdl# m12 long stroke, dssd cold header 12mm cut off capacity @ 85,000 psi 100mm max capacity under head 130mm max blank 20mm min blank 125 ppm o.a. dimensions: 1.68m x 4.3m w x l appro...

  • NATIONAL M20 DSSD LONG STROKE COLD HEADER

    No price - Newark, NJ, USA
    • Manufacturer: National

    one used national model m20ls dssd cold header, serial no 34210, built 1970 16mm cutoff diameter alloy 20mm cutoff diameter mild steel 150mm maximum shank length 32mm/200mm maximum cutoff lengt...

  • 7/64" NAKASHIMADA PF-210 2 DIE 3 BLOW COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: PPM
    • Weight: 2,500 LBS.

    equipped with: reconditioned by nakashimada 2010 dead point monitor

  • 1/8" HARTFORD MODEL 2-450 COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: Hartford

    equipped with: helm part guard monitor diameter: 1/8" | co length: 1.460" | shank length: 3/4" (.781") | pieces per minute: 450

  • 1/4" AMBA MODEL BNG-D / 801 COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: PPM
    • Weight: 7,500 LBS

    equipped with: spare transport spindles tooling motor: 240v / 60 hz 3 phase - 10 hp | approx. weight: 7,500 lbs | maximum production: 85 ppm | maximum bolt length: 12" (305mm) | minimum bolt length...

  • 1/4" ASAHI OKUMA AOS-6 COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: Okuma

    maximum diameter: 1/4" (6mm) maximum length of wire: 1-3/4" minimum length of wire: 1/4" maximum production: 250 ppm electrics: 230v / 60hz / 3 phase

  • HATEBUR Mdl# BKA2 4 DIE PROGRESSIVE COLD HEADER

    No price - Newark, NJ, USA
    • Manufacturer: CAM

    hatebur model bka2 4 die progressive cold header, serial no 302121, built 1984 14mm cutoff diameter 6-12mm bolts with shank diameter 15-102mm shank length 28mm maximum part diameter 150 pieces pe...

  • ASAHI OKUMA AOT 6XL 2 DIE 2 BLOW COLD HEADER

    No price - Newark, NJ, USA
    • Manufacturer: Okuma

    one used asahi okuma model aot6xl 2die 2blow cold header, serial no 5-119, built 1984 6mm cutoff diameter 15-75mm die kickout 12-95mm cutoff length 220 pieces per minute 10mm pko stroke equipp...