• NATIONAL Mdl# FX44M PROGRESSIVE DIE HEADER

    • Manufacturer: National

      14.8mm cutoff diameter 85,000psi 10/90mm min/max kickout stroke 12-123mm min/max cutoff length 14-30mm min/max pko stroke 240 pieces per minute 800kn heading load equipped with: bushing cutoff, linear feed, i...

      No price
      Newark, NJ, USA
    • 3/16" NATIONAL 4 DIE PROGRESSIVE HEADER

      • Manufacturer: National

        one used 3/16" 4 die national progressive header serial no 27072 built new 1964 3/16" maximum cutoff diameter 1 1/2" maximum shank length 2 1/4" maximum cutoff length 110 pieces per minute with trimming, no ...

        No price
        Newark, NJ, USA
      • 1/4" NAKASHIMADA TH3-6A 3 DIE 3 BLOW COLD HEADER

        • Manufacturer: PPM
        • Weight: 15,500 LBS (7,000 kg)

        equipped with: separate lubrication wire fine feed adjustment

        No price
        Ivyland, PA, USA
      • 5/16" MORONI MB-764 COLD HEADER

        • Manufacturer: MB
        • Weight: 15,500 LBS

        equipped with: e-manual motor: 25 hp (18.5kw) | pko stroke: 3/4" (20mm) | production: 230 ppm variable | number of dies: 4 | approximate weight: 15,500 lbs | maximum bolt length: 2-1/4" (60mm) | maximum blank len...

        No price
        Ivyland, PA, USA
      • 3/16" NATIONAL 4 DIE PROGRESSIVE HEADER

        • Manufacturer: National

          one used 3/16" 4 die national progressive cold header 3/16" maximum cutoff diameter 1 1/2" maximum shank length 2 1/4" maximum cutoff length no trimming, pointing or threading 110 pieces per minute ac motor...

          No price
          Newark, NJ, USA
        • 3/16" NATIONAL 4 DIE BOLT PROGRESSIVE HEADER

          • Manufacturer: National

            one used 3/16" 4 die national progressive header serial no 23686 built new 1956 3/16" maximum cutoff diameter 1 1/2" maximum shank length 2 1/4" maximum cutoff length 110 pieces per minute with trimming, no ...

            No price
            Newark, NJ, USA
          • 1/4" NAKASHIMADA PF-630 2 DIE 3 BLOW COLD HEADER

            • Manufacturer: NAKASHIMADA
            • Weight: 11,000 LBS

            equipped with: pko approx. size: 11'l x 5'w x 6'6"h | approx. weight: 11,000 lbs | production speed: 50 - 170 | max. cutoff length: 1.575" | max. cutoff diameter: 1/4"

            No price
            Ivyland, PA, USA
          • 3/16" NAKASHIMADA PF-420 2 DIE 3 BLOW COLD HEADER

            • Manufacturer: PPM

              equipped with: pko 2nd & 3rd punches electrics: 220/440v / 60hz / 3 phase | max. diameter: 3/16" (4mm) | max. shank length: 3/4" (20mm) | max. cutoff length: 1" (25mm) | maximum production: variable to 200 ppm

              No price
              Ivyland, PA, USA
            • HATEBUR BKA2 4 DIE PROGRESSIVE HEADER

                • Weight: 24.000 lbs.

                diameter range ................ 6 - 12 mm shaft length under head ....... 15 - 102 mm kickout length max ............ 40 mm speed /min .................... 15 - 125 weight ........................ 24.000 lbs. eq...

                No price
                Newark, NJ, USA
              • 5/16 NATIONAL 56 2 DIE 3 BLOW COLD HEADER

                • Manufacturer: National

                  equipped with: trim, pko & rko electrical specs: 440 v / 3/60 | maximum diameter: 5/16" | maximum 1st die ko: 4-1/2" | maximum 2nd die ko: 2-1/2" | maximum production: 150 ppm | maximum cutoff length: 3"

                  No price
                  Ivyland, PA, USA

                Have 5 seconds to help us improve the results?

                I'll do it
                No thanks