• LODGE & SHIPLEY-POWER-TURN RXE-2516 HOLLOW-SPINDLE 2648

    • Manufacturer: Lodge & shipley
    • Distance between Centers: 96"
    • Spindle Nose: A-2-15"

    lodge & shipley "powerturn" rxe-2616 hollow spindle lathe new: 1990 sn: 51350 specifications: swing over over bed ....................... 26-1/2" swing over cross slide .................... 20" distance between c...

    No price
    Deer Park, NY, USA
  • 1964 Weipert /2013 9 1/4" Hollow Spindle Lathe

    • Manufacturer: Weipert

      bore: 9.25" | equipment: 31.5" 4 jaw chuck 3-roller steady rest metric threading only micrometer type carriage stop rapid on carriage via electric motor built into the apron variable gear ratios on the cross-sli...

      No price
      Dundee, FL, USA
    • STANKO HOLLOW SPINDLE 31" X 120" 2534

      • Manufacturer: Stanko

        stanko hollow spindle engine lathe specification swing over bed ...................... 33" swing over cross slide ............... 18" hole thru spindle .................... 12" centersdistance .....................

        No price
        Deer Park, NY, USA
      • 2007 35"x80"cc Haas CNC Flat Bed, Hollow Spindle Lathe

        • Manufacturer: Haas
        • Model: TL-4

          delivered by haas 01/08 35" swing, 80" centers, 10.5" spindle bore, two 25" manual 4-jaw chucks w/ 12.5" thru-hole 2-speed gear box, quick change tool post chip conveyor, rigid tapping, remote jog handle

          No price
          Irvine, CA, USA
        • 42 x 120 Summit Hollow Spindle Lathe #3414

          • Manufacturer: Summit
          • Spindle Bore: 12.2"
          • Spindle Nose: A2-20

          42 x 120 summit hollow spindle lathe with 12.2" spindle bore s/n: 08056 model: a3 mfd: 2009

          No price
          Houston, TX, USA
        • 26” x 80” ROUGHNECK (Chu Shing) Lathe Hollow Spindle

              26 x 80 roughneck (chu shing) lathe hollow spindle model hr-vs 26x80g, 6.1 spindle bore, 15hp variable speed in (4) ranges4-way rapid traverse, 11 steady rest, taper, (2) 20 4-jaw chucks, removable gap. manufactu...

              No price
              Houston, TX, USA
            • 26″ x 80″ Roughneck (Chu Shing) Lathe Hollow Spindle

                  26 x 80 roughneck (chu shing) lathe hollow spindlemodel hr-vs 26x80g, 6.1 spindle bore, 15hp variable speed in (4) ranges4-way rapid traverse, 11 steady rest, taper, (2) 20 4-jaw chucks, removable gap. manufactur...

                  No price
                  Houston, TX, USA
                • 1983 Crawford Swift LaPointe B5023

                  • Manufacturer: General electric
                  • Spindle Bore: 25.00 in 635.00 mm
                  • Distance between Centers: 528 in 13.41 mm

                  2 heavy duty 23.6 (600mm) capacity steady rests, 4 section bed, total bed length 742 in( 18.94 m), moveable headstock with positive latch every 4.33 in (110mm), moveable cnc slide, slide and headstock can be posi...

                  No price
                  Washington, PA, USA
                • Lodge & Shipley PFT40

                  • Manufacturer: Lodge & shipley

                    no motor serial: 49516 | control: fagor 8055 control | cap width: 144.00 in 3657.60 mm | cap length: 33.00 in 838.20 mm | condition_info: good | hydraulic chuck: 24.00 in 609.60 mm | swing over saddle: 21.00 in 5...

                    No price
                    Washington, PA, USA
                  • 1982 Lodge & Shipley Profiturn 40 27759

                    • Manufacturer: Lodge & shipley
                    • Distance between Centers: 160"
                    • Spindle Nose: A-1

                    ge fanuc powermate single axis cnc axis control (for tooling use) 24" 4-jaw front and rear chucks 4-position turret with cervic coupling 6-position turret with cervic coupling hardened ways (2) steady rests 24" 3...

                    No price
                    Melville, NY, USA

                  Have 5 seconds to help us improve the results?

                  I'll do it
                  No thanks