• 1971 Lucas CNC Table Type Horizontal Boring Mill 642B120 42B4426

    No price - Washington, PA, USA
    • Manufacturer: Lucas
    • Spindle Diameter: 6.00 in 152.40 mm
    • Control: New CNC

    feed range .005 - .100 ipm (.127 - 2.54 mm/min) ways: hardened | power: existing | control: new cnc | table width: 60.00 in 1524.00 mm | table length: 120.00 in 3048.00 mm | spindle power: 40.00 hp...

  • OKUMA MC-500H CNC Horizontal Machining Center with OSP7000M 1996

    No price - Livonia, MI, USA
    • Manufacturer: Okuma
  • HYUNDAI SPT-H400 CNC HORIZONTAL MACHINING CENTER

    No price - Bannockburn, IL, USA
    • Manufacturer: Hyundai

    hyundai spt-h400 cnc horizontal machining center equipped with fanuc 18m cnc controls (2) 16″ pallets pallet size 15.7″ x 15.7″ no. pallets 2 max. weight on pallet 880 lbs travels x-axis 20.05″ y-...

  • 15232 1993 SAEILO CNC HORIZONTAL MACHINING CENTER MACH3A

    $16,500 - York, PA, USA
    • Manufacturer: SAEILO

    saeilo cnc horizontal machining center price: loaded on truck, our warehouse, york, pa …… $16,500.00 hmc stock #15232-p machine serial no. 4c41200086 machine model no. mac 3a new date: septembe...

  • Weeke BHC 250 CNC Router

    $32,000 - Sheboygan, WI, USA Recently Added
    • Manufacturer: Weeke

    spindle needs to be reconditioned one floor mat to be checked and repaired both repairs can be covered with your stiles tech on installation must-sell; weighing all offers 10 vertical drilling spin...

  • BIESSE CNC ROUTER-ROVER B 4.40 FTK

    $58,995 - Grand Rapids, MI, USA
    • Manufacturer: Rover

    1-used biesse rover b 4.40 ftk cnc machining center. working field: x= 145″, y= 54.3″, z= 5.9″, precision machined table, 3 back reference pin stops, 1 slide reference pin stop (lh side), centraliz...

  • NTC ZH-4000 4-AXIS CNC HORIZONTAL MACHINING CENTER

    No price - Bannockburn, IL, USA
    • Manufacturer: SEC
    • Spindle Taper: 40

    ntc model zh-4000 4-axis cnc horizontal machining center new 2007 equipped with: fanuc 32i ma cnc controls, full 4th axis, 40 atc, scrapper chip conveyor, spindle chiller, coolant thru tool 1,000 p...

  • OKUMA MA-60HB 3-AXIS CNC HORIZONTAL MACHINING CENTER

    No price - Bannockburn, IL, USA
    • Manufacturer: Okuma
    • Spindle Taper: #50

    okuma ma-60hb 3-axis cnc  horizontal machining center new 1999 motor driven with 27 hp/20 hp, 3-phase, 60 cycle ac spindle drive motor and controls md coolant equipped with: okuma osp-u100m cnc con...

  • Crystal CK0640A CNC Horizontal Lathe

    $15,900 - Sanford, FL, USA Recently Added
    • Manufacturer: Crystal

    crystal ck0640a cnc horizontal lathe machine specifications: spindle bore φ42mm max. swing over bed φ300mm max. swing over carriage φ130mm z-axis max length of work piece 250mm x- axis max motion t...

  • 1983 Saint Etienne CNC Lathe – Flat Bed

    No price - Washington, PA, USA
    • Manufacturer: Fanuc
    • Spindle Bore: 3.24 in 82.30 mm
    • Distance between Centers: 315.00 in 8001.00 mm

    one or two carriages, tailstock quill travel 12 inch (305mm), steady rests, new servo motors, new servo drives and spindle drive