Used inline blister

- 13 listings found
Sort by Price: Low to High | High to Low
  • Sentinel / P FT2526 Inline Blister Former

    • Manufacturer: Sentinel / P

      Serial no. 270-017-74 voltage: 220 volt ac / 3 phase / 110 amps. top oven – panel heating elements. bottom oven – cal-rod elements. 1. rod end assemblies are missing from the upper and lower form station pneumati...

      No price
      Cleveland, OH, USA
    • Sencorp Blister Inline (Blister) HP12 5D0522

      • Manufacturer: Sencorp

        Sencorp model hp12, automatic blister sealer is capable of up to 25 cycles per minute with number of product – depending on materials and application. heat seal area: 11-1/4 x 17-1/2". nesting plates measure: 11....

        No price
        Carol Stream, IL, USA
      • Sencorp Blister Inline (Blister) HP12 5D0521

        • Manufacturer: Sencorp

          Sencorp model hp12, automatic blister sealer is capable of up to 25 cycles per minute with number of product – depending on materials and application. heat seal area: 11-1/4 x 17-1/2". nesting plates measure: 11....

          No price
          Carol Stream, IL, USA
        • Zed Blister Inline (Blister) 15111 5C7011

          • Manufacturer: Zed

            Semi-automatic, inline, blister sealer is rated to 20 cycles per minute. equipped with a 14" x 18" seal area, 26 platens, automatic card feeder, 8′ long product load area, 5000 lbs seal pressure at 100 psi plc co...

            No price
            Carol Stream, IL, USA
          • Sentinel Blister Inline (Blister) JA915 automatic inline intermittent motion blister heat sealing machine capable of cycling up to 15-20 cycles per minute 5D2312

            • Manufacturer: Sentinel

              Automatic inline intermittent motion blister heat sealing machine is rated to 20 cycles per minute. equipped with 10" x 18" platens, six load station on each side of machine, card feed station, heat seal station ...

              No price
              Carol Stream, IL, USA
            • Uhlmann Form & Fill Blister Pkg/Tablet UPS4ET 5D4381

              • Manufacturer: Uhlmann

                Uhlmann 8 lane, single stroke system, automatic blister former capable of 50 form cycles per minute, 50 punch cycles per minute and a 400 blisters per minute. unit equipped with a forming area of 220mm x 284mm a...

                No price
                Carol Stream, IL, USA
              • Uhlmann Form & Fill Blister Pkg/Tablet UPS-4ET 5E9752

                • Manufacturer: Uhlmann

                  Automatic, single stroke, f/f/s, blister machine capable of doing from 10 – 50 cycles, and up to 400 packs @ min depending on application. 8 lane, machine has a forming area of (220mm x 284mm) and depths up to 28...

                  No price
                  Carol Stream, IL, USA
                • Uhlmann Form & Fill Blister Pkg/Tablet UPS4DT 5C8013

                  • Manufacturer: Uhlmann

                    Automatic blister former capable of speeds from 10 – 50 cycles per minute. maximum output of 700 ppm. has a forming area of 220 x 284mm. maximum depth of 12mm. film web width of 300mm. handles pvc, pvc/pvdc, pvc/...

                    No price
                    Carol Stream, IL, USA
                  • 2007 Grimme GRIMME Tectron 415 aardappelrooimachine Potato harvester

                    • Manufacturer: Grimme

                      4 row, driving distance 75 cm - approx. 2,640 ha cleared - flip flop inline and with drain conveyor - depth wheels hydraulically adjustable - automatic steering wheel - 2-piece roo chopper - recording width 58 cm...

                      No price
                      Grashoek, Netherlands