• 1981 Bridgeport Series 1-2HP Vertical Knee Type Mill

    No price - Farmingdale, NY
    • Manufacturer: Bridgeport
    • Model: SERIES I
    • Spindle Taper: R-8
    • Control: Trak A.G.E. 2

    equipped with: 9" x 48" powerfeed table, power knee, r-8 spindle, 2-hp motor, trak a.g.e. 2 controller

  • 11" X 58" Used Bridgeport Knee Type Milling Machine

    No price - Navasota, TX
    • Manufacturer: Bridgeport
    • Spindle Taper: # 40

    table size 11" x58" spindle taper # 40 spindle speeds variable 50 to 3,500 rpm's spindle feeds .0 to .240 ipm spindle quill travel 5" spindle tilt +/- 45 degrees spindle swivel +/- 45 degrees spind...

  • 1959 10" X 49" Used Cincinnati Knee Type Milling Machine

    No price - Navasota, TX
    • Manufacturer: Cincinnati
    • Spindle Taper: 30 Taper

    note: as taken from service | weight: 3,200 lbs. | table size: 10" x 49" | knee travel: 16" | spindle tilt: +/- 45 degrees | spindle feeds: .001 to .005 i.p.r. | condition info: appears very good ...

  • 11" X 58" Used Bridgeport Knee Type Milling Machine

    No price - Navasota, TX
    • Manufacturer: Bridgeport
    • Spindle Taper: # 300 Universal Kwik Switch

    table size 11" x58" spindle taper universal kwik switch spindle speeds variable 50 to 3,500 rpm's spindle feeds .0 to .240 ipm spindle quill travel 5" spindle tilt +/- 45 degrees spindle swivel +/-...

  • 9" X 42" Used Bridgeport Knee Type Milling Machine

    No price - Navasota, TX
    • Manufacturer: Bridgeport
    • Model: SERIES I
    • Spindle Taper: R- 8

    specification description table size 9" x 42" spindle taper r- 8 spindle speeds step pulley 80 to 2,750 rpm's spindle feeds .001 to .003 i.p.r. spindle quill travel 6" spindle tilt +/- 45 degrees s...

  • Bridgeport Series I Ram-Type Vertical Milling Machine

    No price - Farmingdale, NY Recently Added
    • Manufacturer: Bridgeport
    • Model: SERIES I
    • Spindle Taper: R8

    equipped with: newall 2-axis digital readout, longitudinal power feed, head tilt / swivel, coolant in base, chrome knee ways, 1-shot lube

  • 15185 SHARP VERTICAL MILLING MACHINE TMV

    $7,950 - York, PA
    • Manufacturer: Sharp

    sharp vertical milling machine price: loaded on truck, our warehouse, york, pa ………… $7,950.00 stock # 15185-p serial # 70402933 model: tmv new date: unknown table working surface: 10"x 50" with...

  • Bridgeport Knee Mill Series 1 Manual Mill 1127

    No price - Louisiana, USA
    • Manufacturer: Bridgeport
    • Model: SERIES 1

    the bridgeport knee mill series 1 has been the "real thing" in milling, drilling, and boring for metalworking shops throughout the world. it features an innovative airflow cooling design that uses ...

  • 1997 10" X 50" Used Mighty (Comet) Knee Type Milling Machine

    No price - Navasota, TX
    • Manufacturer: Chevalier
    • Spindle Taper: R- 8

    table size 10" x 50" table weight capacity 946 lbs t-slots on table 3 t-slot size 5/8" spindle taper r- 8 spindle speeds low 50 to 3,750rpm's spindle speeds variable high 60 to 4,500 rpm's spindle ...

  • 9" X 49" New Webb Knee Type Milling Machine

    No price - Navasota, TX
    • Manufacturer: Webb
    • Spindle Taper: R- 8

    equipped with: all webb mills feature: certified meehanite castings, clean room assembled class 7 spindles, cooled spindle heads, lower spindle motor shaft is bearing supported, highest accuracy mi...