• 1996 Nilpeter B200 29604

    No price - Bundall, Australia
    • Manufacturer: Nilpeter

    6 colour plus varnish with interdeck uv,not servo driven,bst inspection unit,rewind/unwind, delam/relam, hotfoil inline , rotary diecutting only . no flatbed diecutting. .available now

  • 2001 Mark Andy FB254 2 29579

    No price - Bundall, Australia
    • Manufacturer: Mark Andy

    10" (250mm), flatbed diecutter only.was used with mark andy scout.1.8 high x 1.2 metre wide x 1.2 m length 500 kgs . 230 volts, 16 amp 3 phase 50/ ngle shift for 2 years.good condition. available...

  • 1986 Iwasaki RUH 50 26953

    No price - Bundall, Australia
    • Manufacturer: Iwasaki

    can do 4 colour and comes with un wind, rewind, uv drier - has a computerized u.v unit (not the type that use's water to cool down)., 2x flat diecutting, laminating and foil , 250mm web width allso...

  • 2002 Bunch 530 26925

    No price - Bundall, Australia
    • Manufacturer: Bunch

    max. web width : 250-290 mm wide,fan folding machine with roll unwind,comes with gears and folding conveyor has 10 1/4, 12 and 14 inch gears plus 80t, 82t, 96t & 112t change gears. it is a total s...

  • 1984 Kopack 250 super 28910

    No price - Bundall, Australia
    • Manufacturer: Kopack

    6 colour machine, 250 mm web full uv with flat bed and rotary diecutting, 800mm ci drum,softel corona treater, delamination,bst web tary die cylinders : 78, 80, 88, 98, 96, 72 t + 1 spare anvil cyl...

  • Labelmen 250 29334

    No price - Bundall, Australia
    • Manufacturer: Labelmen

    brand new spare ci drum. available now

  • 1992 Gallus TYP R200 B 02 28217

    No price - Bundall, Australia
    • Manufacturer: Gallus

    6 x letterpress print stations,5 x uv (1 & 2nd run wet on wet)plus 1 x auxiliary shorko tower flexo coating dwell unit,(1st units ink is cured by the second set of lamps, #1 also can print on rev...

  • 2008 Lintec LPM 300 IT 7VRU 30030

    No price - Bundall, Australia
    • Manufacturer: Lintec

    semi rotary,(intermittent), 100 to 300mm web width,max. printing width 280mm ,repeat length 50 to 245mm,printing speed (max.) 30 to 240 impression/min (varies with repeat length) 7 colour, 2 diecu...

  • 1999 Mark Andy 2200 30177

    No price - Bundall, Australia Recently Added
    • Manufacturer: Mark Andy

    10e inch press (up to 250mm web width), 415v / 3 phase / 50 hz / 30 amp, 21,426 hours run, 8 colours / 3 x die stations, 8 stations hot air dryers + 1 x uv station on 8th deck, operators manual ava...

  • 2004 Sanki 330 30178

    No price - Bundall, Australia Recently Added
    • Manufacturer: Sanki

    width: 330mm, 8 colours plus x 1 flexographic flood coat or spot uv varnish. there are 6 x rotary die cut units. the machine also comes with x2 flatbed foil heads. you can use the first for foili...