• 1969 LOGAN CHUCKER (HARDINGE TYPE)

    No price - Cleveland, OH
    • Manufacturer: Hardinge

    equipped with: 14-1/2" swing over bed 28-1/2" from spindle face to turret face 5 c collet closer 2 speed motor variable speed 225 - 2250 rpm variable feed on the carriage in longitudinal & cross va...

  • 1966 HARDINGE HC CHUCKER 9″

    $5,950 - Bethlehem, PA
    • Manufacturer: Hardinge
    • Model: HC CHUCKER
    • Spindle Nose: 2-3/16″ – 10 RH

    specifications spindle construction: hardinge preloaded ball bearing spindle capacity with round 5c hardinge collets: 1-1/16″ with hexagon 5c hardinge collets: 7/8″ with square 5c hardinge collets:...

  • Hardinge HC Chucker

    No price - Maple Grove, MN
    • Manufacturer: Hardinge
    • Model: HC CHUCKER
    • Spindle Nose: 2-3/16" - 10 R.H.

    threaded nose spindle lever 5c collet closer eight station turret variable speed drive coolant system travel dial all available manuals

  • 1995 Mazak QT10 Chucker Mazatrol T-Plus

    No price - Dundee, FL
    • Manufacturer: Mazak
    • Spindle Nose: A2-5" / 1.97"

    the mazak qt10, or also referred to as a mazak qt-10,  is high speed, high productivity machine that commonly uses a 6” hydraulic chuck.  this machine was introduced to the market in the later part...

  • 2008 Haas SL-10 Chucker 32 BIT

    No price - Dundee, FL
    • Manufacturer: Haas
    • Spindle Nose: A2-5" / 2.31"

    equipment: 5c collet chuck chip auger losma mist collector model darwin 600 rs 232 port interface usb port interface wired 208/230 voltage high speed brushless servos all available manuals all ava...

  • 2005 Haas SL-10 Chucker 32 BIT

    No price - Dundee, FL Recently Added
    • Manufacturer: Haas
    • Spindle Nose: A2-5" / 2.31"

    equipment: 6.5" 3 jaw hydraulic chuck tool presetter system chip auger rs 232 port interface high speed brushless servos all available manuals all available tooling | chuck size: 6" hydraulic | tu...

  • 2013 Haas ST-20 Chucker 32 BIT

    No price - Dundee, FL
    • Manufacturer: Haas
    • Spindle Bore: A2-6" / 3.0"
    • Spindle Nose: A2-6" / 3.0"

    equipment: 8" 3 jaw hydraulic chuck tool presetter spindle orientation vdi 12 station turret 1 mb progamming memory rigid tapping rs 232 port interface usb port interface all available manuals has...

  • 50" x 144" cc, NILES, 48" FACE PLATE CHUCK W/ JAWS, STEADY REST

    No price - Bedford, OH Recently Added
    • Manufacturer: Niles
    • Distance between Centers: 150"

    swing........................................50" distance between centers (actual)............150" swing over cross slide.......................40" spindle speeds...............................2.04...

  • 2004 Mazak Slant Turn 50N Chucker 1500 Mazatrol Fusion 640T

    No price - Dundee, FL
    • Manufacturer: Mazak
    • Spindle Bore: A2-20" / 12.5"
    • Spindle Nose: A2-20" / 12.5"

    equipment: 12.5" spindle bore schunk air chuck high pressure coolant thread start compensation chip conveyor all available tooling all available manual tool life monitoring paid over $300k in 2004...

  • Haas SL-10BB Chucker (2008)

    No price - Altamonte Springs, FL Recently Added
    • Manufacturer: Haas
    • Spindle Bore: 3"

    haas cnc control 8” chuck a2-6 spindle nose no tailstock big bore option