• ROUGHNECK 26” x 80” Hollow Spindle Lathe

    $53,505 - Houston, TX
    • Manufacturer: ROUGHNECK

    26” x 80” roughneck hollow spindle lathe model hr-vs 26x80g, 6.1” spindle bore, 15hp variable speed in (4) ranges 4-way rapid traverse, 11” steady rest, taper, (2) 20” 4-jaw chucks, removable gap n...

  • 2001 STANKO HOLLOW SPINDLE, 31" X 118", 12"HOLE, 8-355-RPM, TAPER, INCH/METRIC

    No price - Deer Park, NY
    • Manufacturer: Stanko

    stanko hollow spindle engine lathe specification swing over bed ...................... 33" swing over cross slide ............... 18" hole thru spindle .................... 12" centersdistance .......

  • DEAN SMITH and GRACE 25” x 120” & Hollow Spindle Lathe

    $110,000 - Houston, TX
    • Manufacturer: DEAN SMITH and GRACE

    25” x 120” dean smith & grace hollow spindle lathe model 25p. 10 7/8” spindle bore, “fast threading” air kick-out and taper reground and reconditioned. serial #40911. stock # 9918.a. specifications...

  • Taiyo Seiki KY-8035N 0-102

    No price - Washington, PA
    • Manufacturer: Taiyo Seiki
    • Spindle Nose: 20.50 in 520.00 mm

    maximum distance between spindle nose and turret face: 65 in (1650mm), free standing hydraulic unit

  • Lodge & Shipley PFT40

    No price - Washington, PA
    • Manufacturer: Lodge & shipley

    no motor serial: 49516 | control: fagor 8055 control | cap width: 144.00 in 3657.60 mm | cap length: 33.00 in 838.20 mm | condition_info: good | hydraulic chuck: 24.00 in 609.60 mm | swing over sad...

  • 1983 Crawford Swift LaPointe B5023

    No price - Washington, PA
    • Manufacturer: General electric
    • Spindle Bore: 25.00 in 635.00 mm
    • Distance between Centers: 528 in 13.41 mm

    2 heavy duty 23.6 (600mm) capacity steady rests, 4 section bed, total bed length 742 in( 18.94 m), moveable headstock with positive latch every 4.33 in (110mm), moveable cnc slide, slide and headst...

  • 1980 Lodge & Shipley ProfiTurn 40 3220-25

    No price - Washington, PA
    • Manufacturer: Lodge & shipley
    • Spindle Bore: 12.50 in 317.50 mm
    • Distance between Centers: 72.00 in 1828.80 mm

    38.5 inch (978 mm) swing over carriage, ways reground 2007, new servo motors, drives, and cnc 1990s

  • 38" x 24” Hollow Spindle “T” Type Lathe; 10” Spindle Hole; Dual 3 Jaw Chucks

    $18,500 - Casa Grande, AZ

      (1) used 38" x 24" bignall-keeler "t" type lathe; 10" spindle hole; dual 3 jaw chucks; s/n 4-889 specifications: swing over bed...........................38" distance chuck to cross slide.............

    • 2015 Spark Oil Country 22723

      No price - Melville, NY
      • Manufacturer: Spark
      • Distance between Centers: 236.22"

      11.02" spindle bore diameter brand new, special order pendant control (2) 31.49" 4-jaw chucks mounted front & rear mounted 4-way tool post inch/metric threading taper turning attachment (2) large r...

    • 1970 Lodge & Shipley SUPERTURN 3220W 24049

      No price - Melville, NY
      • Manufacturer: Lodge & shipley
      • Distance between Centers: 120"
      • Spindle Nose: A-1

      center drive hollow spindle headstock w/ 12.5" hole 252" & 120" between centers, front & rear 24" front & rear 4-jaw independent chucks w/ 12.62" holes front & rear carriages tailstock additional b...