• 2007 ROMI M 20 CNC "TEACH STYLE" LATHE

    • Manufacturer: Romi

      maximum swing over bed 20.47'' max. swing over cross slide 17.72'' distance between centers 60'' spindle nose a2-6'' spindle bore diameter 2.56'' spindle speeds 3000 rpm machining spindle horsepower 15 hp ac turr...

      No price
      Altamonte Springs, FL, USA
    • 2011 Ganesh TY-5040 5250

      • Manufacturer: Capacity
      • Spindle Bore: 10.140
      • Spindle Nose: A2-15

      x-travel: 27.50 | z-travel: 43.25 | chuck size: 50.00 | spindle bore: 10.140 | spindle nose: a2-15 | spindle speed: 550 | rapid traverse: 394 | total spindles: 1 | turret options: 4-way programmable tool post | ...

      No price
      Maitland, FL, USA
    • 8" chuck Nardini Model Fast Trace CNC Flat Bed Lathe

      • Manufacturer: Fast
      • Spindle Bore: 2"
      • Distance between Centers: 40"

      spindle bore: 2" | spindle nose: d1-6 camlock | equipped with: fanuc 21it cnc w/ teach mode | spindle speeds: 18 speeds 37.5 - 3,000 rpm | swing over bed: 17.5" | main motor drive: 8 hp | maximum cutting length:...

      No price
      Elk Grove Village, IL, USA
    • 1993 Chevalier FCL-2480 CNC Teach Lathe

      • Manufacturer: Chevalier
      • Spindle Bore: 3"
      • Distance between Centers: 80"

      control: dynapath distance between centers: 80" swing over bed: 24" swing over cross slide: 14.5" spindle bore: 3" spindle nose: d1-8" spindle taper: mt-5 spindle speeds (15): 40-1,800 rpm tailstock taper: mt-5 t...

      $12,900
      Sanford, FL, USA
    • Romi M27 CNC Teach Lathe (2008)

      • Manufacturer: Romi

        distance between centers 78.74 inches center height 13.80 inches swing over bed 26.968 inches swing over carriage 16.929 inches spindle bore 6.5 inches 30 horse power moter parat tool post with holders two steady...

        No price
        Altamonte Springs, FL, USA
      • MILLTRONICS ML26-160 Teach Lathe (2014)

        • Manufacturer: Milltronics

          max. swing in gap 34.2'' gap distance 12.75'' max. swing over bed 27'' max. swing over cross slide 16.1'' distance between centers 164'' spindle bore dia. main 6.00'' rapid travel speed of supports & tailstock a2...

          No price
          Altamonte Springs, FL, USA
        • 2007 Romi M 20 #6339

          • Manufacturer: Romi
          • Spindle Bore: 2.56''
          • Distance between Centers: 60''

          fanuc 21it cnc control manual, teach and run modes dual handwheels 10" manual 3-jaw chuck steady rest

          No price
          Huntley, IL, USA
        • 2001 Chevalier FCL-1840D 24527

          • Manufacturer: Chevalier
          • Spindle Bore: 2.25"
          • Distance between Centers: 40"

          serial no.: x1856004 anilam 1200t cnc control manual, teach, & cnc modes 8" or 10" chuck manual chuck capacity (no chuck included) dorian tool post tailstock work light power feed jog modes constant surface speed...

          No price
          Melville, NY, USA
        • 2000 Mazak 650N W./Gantry Loader #6459

          • Manufacturer: Mazak
          • Spindle Nose: A2-8'' /3.46''

          (2) tool presetter automatic center partician turret air blast l/r automatic power on/off absolute position detection gl500n gantry loader with pitch feed ,robot controller with teach d-3 hand synchronized spindl...

          No price
          Huntley, IL, USA
        • Ganesh TY-5040CNC Dual-Chuck CNC Teach Lathe (2011)

          • Manufacturer: Ganesh

            swing over bed 52” swing over cross slide 36” center height 25.6” bed width of ways 35.4” tool turret 4-way progr4ammable toolpost spindle motor 40 hp peak power spindle speed 5 – 550 rpm (3 gear ranges) spindle ...

            No price
            Altamonte Springs, FL, USA