• Balzer load stand

    $2,300 - Chilton, WI
    • Manufacturer: Balzer

    like new balzer load stand6" or 8" inlet, can make fittings to adapt to any hose coupling.12" discharge.

  • Fiskars

    No price - Spain
    • Manufacturer: Fiskars

    country: spain | division: trucks and trailers

  • TSC MANUFACTURING Pipe Handling Equipment - Break Out | Make Up

    No price - Houston, TX
    • Manufacturer: TSC Manufacturing

    mousehole the tsc mousehole is mounted on the drill floor. it is used in conjunction with other tubular handling equipment for offline make-up and break out operations, to increase operation effici...

  • Bio-Rad EXQuest Spot Cutter

    $25,995 - Golden Valley, MN
    • Manufacturer: Bio-Rad

    the exquest™ spot cutter is a precision instrument that accurately locates and excises protein bands or spots from 1-d and 2-d gels or blots. it then loads them into 96- and 384-well microplates or...

  • Pipe Handling Equipment - Slips

    No price - Sugar Land, TX

      uc3 casing slip the baash-ross type uc-3 slips design with many narrow segments. they are hinged together to wrap around the casing pipe and give a more uniform pressure. they could easily center t...

    • JIB Crane/Sky Hook Lift System 570lb Load Limit w/ Base Mounting Stand Lifting

      $749 - Leander, TX
      • Manufacturer: JIB

      no testing was performed. span: 1.9 ft | height: 2.1 ft | material: steel | condition info: used. comes in non-original packaging. the sky hook crane is in good condition. | overall height: 25

    • MANITOU Load hook

      No price - Waregem, Belgium
      • Manufacturer: Manitou

      remarks: for manitou

    • 2002 Ferrari F945

      $19,401 - Arvika, Sweden
      • Manufacturer: Ferrari

      ferrari f945 pb a5 scanreco radio winch country: sweden | division: trucks and trailers | remote control: radio | no. of hydraulic boom extensions: 5

    • 2001 Joab L24 lastväxlare tridem

      $6,074 - Arvika, Sweden
      • Manufacturer: Hooklifts

      joab l24 ton cargo trucks with hydraulic locks. average air lever. sat mounted on scania 8x4 * 4 -01 wheelbase 3750mm cc hook / roll: 5700mm (taken from the transport board) ok working order a...

    • 2005 Joab L20A 5450mm vikbart torn

      $9,907 - Arvika, Sweden Recently Added
      • Manufacturer: Joab

      joab l20a cc 5450mm with foldable tower that sat on scania 6x2 with a wheelbase of 4300mm. demountable is test driven the car without comment, normal wear and tear. 6st flak dowel crane platform....