• HAMMER Planer - Thicknesser A3-41 from FELDER Denmark

    $3,055 - Rødekro, Denmark
    • Manufacturer: Hammer

    a real price flapping - dual-lifting afretterplaner with spring support - ethåndsbetjent grader depth of cut without lock these are just some of the new developments on hammer a3-41 you do not see ...

  • Case CX 210 B LN // // 3.055h Hammer / gripper

    $86,928 - Burghaun, Germany
    • Manufacturer: Case IH

    equipment of this case cx 210 b ln // // 3.055h hammer / gripper: all-wheel additional headlight differential lock condition of chain at 60% condition of drive at 60% profitable 3055 operating hour...

  • HAMMER Planer - A3-41A from Felder Denmark

    No price - Rødekro, Denmark
    • Manufacturer: Hammer

    a real price flapping superior austrian mechanical engineering and a sensational price-performance ratio motor 5.5 hp afretterbredde 410 mm afretterplan 1800 mm trimming fence 1100 mm 3-knife cutte...

  • HAMMER Planer-Thicknesser A3-26 from Felder Denmark

    No price - Rødekro, Denmark
    • Manufacturer: Hammer

    a real price flapping - dual-lifting afretterplaner with spring support - ethåndsbetjent grader depth of cut without lock the new model hammer a3-26 made the same innovations as the famous a3-31 an...

  • HAMMER Planer / Thicknesser A3-31 from FELDER Denmark

    No price - Rødekro, Denmark
    • Manufacturer: Hammer

    a real price flapping - here grader / thicknesser where every detail is thought through - afretterplanerne opens backwards, so they are not in the way when you planing - dual-lifting afretterplaner...

  • Lockformer Pittsburgh Lock Model 16 LK-16 Lock Machine

    No price - Perth, Australia
    • Manufacturer: Edge
    • Capacity: 16-20 Gauge Uses approximately 1-3/8" of material

    features include: the 16 gauge pittsburgh lock machines has 7 forming stations with 2 forming positions. one position forms the pittsburgh lock, while an auxiliary or outboard position has the abil...

  • Lockformer Pittsburgh Lock Model 18 LK-16 Lock Machine

    No price - Perth, Australia
    • Manufacturer: Edge
    • Capacity: 18-22 Gauge Uses approximately 1-1/8" of material

    features include: the 16 gauge pittsburgh lock machines has 7 forming stations with 2 forming positions. one position forms the pittsburgh lock, while an auxiliary or outboard position has the abil...

  • 2011 MAN 18.360 BL / 4x2 TGS Palift PAK 13 to. Hammer

    $62,689 - Hamburg, Germany
    • Manufacturer: MAN
    • Mileage: 184,800 km

    12-speed zf as tronic transmission, front axle vok-09 -cranked, rear axle hy-130 i = 3,36, differential lock ha, abs, asr, evb (rocker arm brake), man brakematic (electric brake system) .- coupling...

  • EAGLE MORLIN PITTSBURG LOCK HAMMER, ELECTRIC (+UPS $)

    No price - McClellan Park, CA
    • Manufacturer: Eagle
    • Weight: Position of handle affords

    model: 5400 the morlin 5400 hammer speeds up and takes the work out of the only tedious, costly, and time-consuming job of fabricating duct work-closing the "seam." this new morlin tool breezes alo...

  • 2013 CATERPILLAR 321D LCR

    $179,500 - Redmond, OR
    • Manufacturer: Caterpillar
    • Model: 321D LCR
    • Hours: 1734

    export pkg: bucket pin, cab-rops:w/ vandal guard boss, joystick: thumb wheel, seat, h-back, w/heater, s/air, belt, seat, 3" retractable, panel: std start switch, mat: floor, air conditioner, coolin...