• KANSAS ( NEW/PETERSON) FLYWHEEL GRINDER

    • Manufacturer: Peterson

      standard "cup type" wheels 5.5" dia. x 1.250" i.d. wheel dresser flywheel cutting attachment power elevation power table drive wheel arbors flywheel hold down arbors coolant system exchange factory rebuilt aprox ...

      No price
      Cleveland, OH, USA
    • NEWPORT UNIVERSAL CLYNDRICAL

      • Manufacturer: Newport

        preowned 10" x 25.5"cc newport universal cylindrical grinding machine with id attachment maximum swing over table 10" maximum diameter ground with new wheel ...

        No price
        Cleveland, OH, USA
      • Wicker Machine Co

        • Manufacturer: Caterpillar

          120" wide x 96" long 8' wide forks x 3 1/2 thick, sn 14325 model wpdc966g or h, top pins 90mm with 4 1/4 between ears, bottom pin 2 1/2 pin hole with 5 1/4 between ears, 36 3/4 id and 47 1/2 od, call for more inf...

          $9,250 (USD)
          Holland, MI, USA
        • GLEASON 13A CUTTER SHARPENER

          • Manufacturer: Gleason

            the 13 hypoid cutter sharpener is an automatic, wet-type grinder for sharpening spiral bevel and hypoid cutters. the standard machine accomodates all gleason spiral cutters from 6" through 12" diameter. it ca...

            No price
            Warren, MI, USA
          • GLEASON NO. 13 GEAR CUTTER SHARPENER

            • Manufacturer: Gleason

              the 13 hypoid cutter sharpener is an automatic, wet-type grinder for sharpening spiral bevel and hypoid cutters. the standard machine accomodates all gleason spiral cutters from 6" through 12" diameter. it ca...

              No price
              Warren, MI, USA
            • 4 FT. X 1/4" ROLSHEAR SLIP ROLL

                  used 4 ft. x 1/4" rolshear slip roll model no. 3c with angle bending attachment bending capacity: 4' x 1/4" mild steel angle bending capacity: 1-1/2" x 1-1/2" x 3/16" leg out -min. dia. 20" 1-1/4" x 1-1/4" x 3/15...

                  No price
                  Elk Grove Village, IL, USA
                • 3" X 3" X 3/8" STECO ANGLE BENDING ROLL

                      used 3" x 3" x 3/8" steco angle bending roll model no. sbm/3 with leg-in and leg-out attachment capacities: angles - leg out: 3" x 3" x 3/8" - minimum dia. 24" mild steel angles - leg in: 2.5" x 2.5" x 3/8"-min. ...

                      No price
                      Elk Grove Village, IL, USA
                    • 1967 Hurth SRS-400 18136

                      • Manufacturer: Hurth
                      • Weight: 11000.00 lbs 5000.00 kg

                      power: existing | weight: 11000.00 lbs 5000.00 kg | machine width: 78.74 in 2000.00 mm | condition_info: excellent | dressing range: 2.17 in 55.00 mm | machine height: 96.46 in 2450.00 mm | machine length: 88.58...

                      No price
                      Washington, PA, USA
                    • 1981 Hurth SRS-402 21787

                      • Manufacturer: Hurth
                      • Weight: 11000 lbs 5000 kg

                      power: existing | weight: 11000 lbs 5000 kg | machine width: 78.74 in 2000.00 mm | condition_info: good | machine height: 96.46 in 2450.00 mm | machine length: 88.58 in 2250.00 mm | maximum helix angle: 55 degre...

                      No price
                      Washington, PA, USA
                    • Delta 438 11658

                      • Manufacturer: Delta

                        2 hp single ph 115/230 single phase, (wired 230 volt) motor on-off switch with o/l protection auto electro-mechanical brake blade guards with anti-kickback attachment retractable leaf guard

                        $950 (USD)
                        Williamsport, PA, USA

                      Have 5 seconds to help us improve the results?

                      I'll do it
                      No thanks