• BRIDGEPORT HMC

    No price - Warren, MI, USA
    • Manufacturer: Bridgeport

    equipped with: bridgeport dx-32 control bijur lube system #40 taper 22 atc specifications: x-axis: 22" y-axis: 16" z-axis: 20" table size: 45" x 16" table height above floor: 31" max. weight on ...

  • 1971 19-1/2" X 96" Used K & T Horizontal Milling Machine With Universal Vertical Head

    No price - Navasota, TX, USA
    • Manufacturer: K & T
    • Spindle Taper: 50"

    weight: 24,000 lbs. | coolant: yes | main motor: 30 hp. 220 / 440 / 3 | table size: 19-1/2" x 96" | rapids knee: 37-1/2 i.p.m. | table travel: 50" | spindle taper: 50" | condition info: very good ...

  • 1990 17" X 71" Used WMW Heckert Horizontal Milling Machine With Independent Universal Vertical Head

    No price - Navasota, TX, USA
    • Manufacturer: WMW Heckert
    • Spindle Taper: 50"

    width: 96" | height: 96" | length: 96" | weight: 9,600 lbs. | coolant: yes | pendent: yes | wide knee: yes | main motor: 15 hp. | table load: 3,300 lbs. | table size: 15.7" x 71" | rapids knee: 40...

  • 1980 12" X 63" Used Ajax Horizontal Milling Machine With Vertical Head

    No price - Navasota, TX, USA
    • Manufacturer: Ajax
    • Spindle Taper: #40

    weight: 6,500 lbs. | coolant: yes | table size: 12" x 63" | rapids knee: 37-1/2 i.p.m. | table travel: 31-1/2" | condition info: very good | main motor main: 10 hp. | table cross travel: 12" | rap...

  • 1980 15" X 61" Used Vernier SA Horizontal Milling Machine With Vertical Head

    No price - Navasota, TX, USA
    • Manufacturer: Vernier
    • Spindle Taper: #50

    weight: 7,500 lbs. | coolant: yes | table size: 15"x61" | rapids knee: 37-1/2 i.p.m. | table travel: 31-1/2" | condition info: very good | main motor main: 15 hp. | table cross travel: 16" | rapid...

  • 1975 15" X 68" Used K&T Horizontal Milling Machine With Vertical Head

    No price - Navasota, TX, USA
    • Manufacturer: K & T
    • Spindle Taper: 50 Taper
    • Control: Yes

    weight: 9,250 lbs. | coolant: yes | table size: 15-1/2" x 68-1/2" | rapids knee: 75 i.p.m. | table travel: 34" | arbor support: yes | condition info: excellent | machine height: 96" | main motor m...

  • 1970 15" X 68" Used K&T Horizontal Milling Machine With Vertical Head

    No price - Navasota, TX, USA
    • Manufacturer: K & T
    • Spindle Taper: 50 Taper
    • Control: Yes

    specification description table size 15-1/2" x 68-1/2" table travel 34" table swivel +/- 30 degrees table cross travel 12" knee travel up & down 16" spindle taper horizontal # 50 spindle speeds hor...

  • 1978 15" X 68" Used K&T Horizontal Milling Machine With Vertical Head

    No price - Navasota, TX, USA
    • Manufacturer: K & T
    • Spindle Taper: 50 Taper
    • Control: Yes

    weight: 9,250 lbs. | coolant: yes | table size: 15-1/2" x 68-1/2" | rapids knee: 75 i.p.m. | table swivel: 30 degrees | table travel: 34" | condition info: very good | machine height: 96" | main m...

  • 1998 Cincinnati MAGNUM 800 35108

    No price - Los Angeles, CA, USA
    • Manufacturer: Cincinnati
    • Spindle Taper: CT-50

    (1) used cincinnati magnum 800 hvc 55-axis horizontal machining center, w/ 6 pallet poolnew 1998specifications:travels- a axis (spindle tilt) ... 180 deg (+60/-120)- b axis (pallet rotation). .001 ...

  • Heckert FU400/S/APUG MITUTOYO DRO 333037

    No price - Longmont, CO, USA
    • Manufacturer: Heckert

    heckert fu400/s/apug, mitutoyo dro, arbor supports, 50 taper general specifications as per brochure (please verify details): equipped with: 3-axis mitutoyo dro #50 taper - verticle spindle #50 tape...