Used machining center vert

- 239 listings found
Sort by Price: Low to High | High to Low
  • 1998 Enshu CNC Vert. Machining Center EV650

    • Manufacturer: Enshu
    • Spindle Taper: CT 50
    • Control: Yasnac "Enac"

    control: yasnac "enac" | motor hp: 20 | table size: 25" x 78" | spindle taper: ct 50 | x axis travel: 63" | y axis travel: 25.6" | z axis travel: 26" | spindle speeds: 6000 rpm | automatic tool changer configura...

    $19,500 (USD)
    Elk River, MN, USA
  • 23"X, 16"Y, 18"Z OKUMA & HOWA MILLAC 40V, Cat 40, Fanuc OM CNC

    • Manufacturer: Caterpillar

      Model: millac 40v s/n: 03996 year: 1996 specifications: x-axis travel 23" y-axis travel16" z-axis travel18" spindle speed8,000 rpm spindle tapercat 40 spindle motor15 hp rapid traverse x,y,z945 ipm atc20 equipped...

      No price
      Helena, AL, USA
    • 23.62"X, 16.93"Y, 18.11"Z, MORI SEIKE SV-400 VMC, Twin Pallets, 12,000 RPM

      • Manufacturer: Deckel Maho

        Sv-400, 3 travels: x axis: 23.62" y axis: 16.93" z axis: 18.11" distance from table surface to spindle gauge plate: 5.91" min. to 24.02" max. table: table size: 35.43" x 19.69" maximum weight on table: 1,100 lbs....

        No price
        Helena, AL, USA
      • 1995 Mazak CNC Vert Machining Center w/ Dual Pallet Shuttle MTV-655/80

        • Manufacturer: Mazak
        • Spindle Taper: CT#50
        • Control: Mazatrol M-32

        control: mazatrol m-32 | comments: offered as is where is | table size: (2) 25.5" x 88" pallets with side address pallet changer | spindle taper: ct#50 | x axis travel: 78.7" | y axis travel: 25.6" | z axis trav...

        $19,500 (USD)
        Elk River, MN, USA
      • 30"X, 18.11"Y, 17.72"Z, Okuma MX-45 VAE, OSP 700M with Pulse control, 7, 000 rpm, Haas rotary table, 1997

        • Manufacturer: Haas
        • Spindle Taper: BT 40

        One used okuma vmc model: mx-45vae travels: 30” x 18.11” x 17.72” max./min. spindle to table: 24.02” to 6.30” table working surface: 39.37” x 18.11” max. table load: 1,102# spindle speeds: 50-7000 rpm spindle tap...

        No price
        Lake Villa, IL, USA
      • 40"X, 20"Y, 20"Z, Fadal 4020HT, High speed CPU, Graphics, Rigid tap, pre wired for 4th, RS-232 port -Mint, 1995

        • Manufacturer: Fadal
        • Spindle Taper: CAT 40

        One used fadal vertical machining center model: vmc 4020ht table size..............................................47.94” x 20” max table load capacity.......................1500 lbs. x-axis travel..................

        No price
        Lake Villa, IL, USA
      • 2013 Hurco VM-10i Vertical Machining Center, 3 axis, Renishaw Probing, Year 2013. #3603

        • Manufacturer: Hurco
        • Control: WinMaxx

        Asset description notes: hurco vm-10i vertical machining center travels (xyz) 26 x 16 x 20" table 30 x 16" max weight on table 1500 lbs atc 20 cat 40 spindle 10,000 rpm rapid traverse 945 ipm max feed rate 945 ip...

        $45,900 (USD)
        Connecticut, United States
      • No price
        Warren, MI, USA
      • MODEL VMC1000/20 BRIDGEPORT VERTICAL MACHINING CENTER

        • Manufacturer: Bridgeport
        • Spindle Taper: BT40

        Equipped with: heidenhein tnc 2500 control lubrication system coolant system 230/3/60 electrics specifications: x axis travel: 40" y axis travel: 20" z axis travel: 19" spindle horsepower: 20 spindle speeds:...

        No price
        Warren, MI, USA
      • 2004 40"X, 20"Y, 20"Z, OKK VM5-III, Full 4th, 41" x 22" Table, CAT 40, 8,000 RPM, ' #43714

        • Manufacturer: Caterpillar
        • Spindle Taper: CAT 40

        New - 2004 cutting time - 15,000 hours specifications: equipped with: fanuc 160is controller program memory 1,280m (500kb) extended parts program editor run hour & parts count display tool life mgmt, 128 sets wor...

        No price
        Lincolnshire, IL, USA