• 2011 HAAS VF-3YT/50 VMC TK-20591

    $59,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Haas

    length:  52″ width:  23″ table capacity:  4,000 lbs drive: 40 hp, vector speed:  7,500 rpm taper:  cat-50 maximum torque: 236 ft-lb @ 700 rpm, 340 ft-lb @ 575 rpm drive system: 2-speed geared head ...

  • 1994 FADAL VMC20 VMC CK-20546

    $9,500 - Bethlehem, PA, USA
    • Manufacturer: Fadal

    cutting feed rate (x/y/z): .01”-250” (375” at 150%) rapid feed rate (x/y/z): 400 ipm axis drive motor (x/y/z): dc, 1,800 lb thrust ballscrew size (x/y/z): 1.25” diameter x axis: 20” y-axis: 16” z-a...

  • 2004 FADAL 4020HT VMC CK-20545

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Fadal

    cutting feed rate (x/y/z): .01″ – 400 ipm (600″ at 150%) rapid feed rate (x/y/z): 900 ipm (x, y) 700 (z) axis drive motor (x/y/z): ac 3,800 lbs (peak) thrust longitudinal (x-axis): 40″ cross (y-axi...

  • 1998 HAAS VF-4 VMC TK-20549

    $26,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    length: 52″ width: 18″ maximum weight on table: 3,500 lbs t-slots width: .625″ center distance: 3.15″ taper size: #40 taper speed: 0 – 7,500 rpm transmission: 2-speed, geared head maximum torque (f...

  • 16176 2005 HURCO VERTICAL MACHINING CENTER VMX42S

    $36,500 - York, PA, USA
    • Manufacturer: Hurco

    hurco vertical machining center price: loaded on truck, our warehouse, york, pa ………… $36,500.00 hmc stock no. 16176 machine serial no. m444-06001085afd machine model no. vmx42s new date: 2005 tab...

  • 1996 HARDINGE CONQUEST VMC700 VMC CK-19884

    $12,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    length: 40″ width: 19″ weight on table (max.): 1,650 lbs t-slot size (width x no. x pitch): .688″ x 4 x 3.937″ fixture location keyways (width x no.): .688″ x 3 floor to table surface distance: 33....

  • 2012 HARDINGE GX-480-APC DRILL/TAP CENTER TK-20395

    $39,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    auto mode (x, y, z): 1417 ipm feedrate range (x, y, z): 0.1-590 ipm cutting feedrate: 472 ipm minimum increment: 0.00004” speed (belted): 10,000 rpm motor rating: 10 hp torque – 8000 rpm (15 min): ...

  • 1997 DAEWOO ACE 50 VMC JV-20046TK

    $26,500 - Bethlehem, PA, USA
    • Manufacturer: ACE
    • Spindle Taper: 40

    machine dimensions: 126” lr x 111” fb x 115” h machine weight, approx.: 16,500 lbs electrics: 220 volts, 3 ph, 60 cyc mitsubishi meldas 64 control box ways twin turbo conveyors

  • 2007 AKIRA SEIKI SV-1700 VMC JV-20203HB

    $49,500 - Bethlehem, PA, USA
    • Manufacturer: Caterpillar
    • Spindle Taper: CAT-40

    dimensions: 171” lr x 118” fb x 120” h approximate weight: 23,000 lbs mitsubishi mi645 control rs-232c port spindle chiller remote pendant chip auger side mount tool changer

  • 1995 LEADWELL MCV-760AP VMC HB-20429IP

    $9,500 - Bethlehem, PA, USA
    • Manufacturer: Leadwell

    x-axis travel: 29.92″ y-axis travel: 20.08″ z-axis travel: 20.08″ spindle nose to table: 6.299″ x 26.38″ spindle center to column surface: 21.65″ table center to column: 11.81″ – 31.89″ spindle mot...