• Unitek Peco 61F head, 2-233-01,  with CP pedal. 1000 amps. Manual

    $1,850 - Salem, MA, USA
    • Manufacturer: PECO

    unitek peco 61f head, 2-233-01,  with cp pedal. 1000 amps. manual actuation with overforce protection. 1-10# accepts 1/8" round electrode.

  • Taylor 10 section 8.5w 12119

    $7,500 - Williamsport, PA, USA
    • Manufacturer: Taylor

    10 section manual clamp wheel 8-1/2' wide 4 clamps per section 32" clamps manual rotation and tightening

  • Used Clausing/Kondia FV1-48VS08 Vertical Milling Machine

    $6,450 - Dousman, WI, USA Recently Added
    • Manufacturer: Clausing

    used clausing/kondia fv1-48vs08 vertical milling machine specifications table size 9.0” x 48.0” x axis travel 31.5” y axis travel 15.0” quill travel 5.0” spindle horsepower 3 hp spindle rpm (vari...

  • Used Chevalier FM-4VKH 2 Axis CNC Milling Machine

    $11,750 - Dousman, WI, USA Recently Added
    • Manufacturer: Chevalier

    used chevalier fm-4vkh 2 axis cnc milling machine specifications table size 10.0” x 54.0” x axis travel 33.2” y axis travel 16.3” quill travel 5.0” spindle horsepower 5 hp spindle rpm (vari-speed...

  • Buss 66-40H 12089

    $34,900 - Williamsport, PA, USA
    • Manufacturer: Buss
    • Capacity: 40" x 8"

    equipped with hermance helical cutterhead 40" x 8" cap., 20 hp - 3,600 rpm direct drive single top head top sectional infeed rolls, sectional chip breaker 1/16" min. - 8" max. manual opening with i...

  • 2008 Vitap Orbiter 11501

    $34,000 - Williamsport, PA, USA
    • Manufacturer: Vitap
    • Capacity: 500mm-2400mm

    with glue pot and trimming station detail of gluing device, with automatic feeder and vacuum working table trimming unit with simultaneous lifting of the 2 motors by a manual lever (plc) touch scre...

  • Powermatic 1150 12569

    $1,750 - Williamsport, PA, USA
    • Manufacturer: Powermatic

    used powermatic drill del 1150 15" drill press; floor model; step pulley; complete with tilting table, key chuck spindle, 1/2 hp, 3 ph motor, 230/460 volt, and manual switch.

  • Powermatic 160 H 11863

    $8,000 - Williamsport, PA, USA
    • Manufacturer: Powermatic

    16" single surface planer sn 760007 5hp 3-phase 208-230 volt single phase belt drive motor push button magnetic starter connected for 230 volts 0-6" thickness capacity helixhead insert knife (15x1...

  • 2001 Weinig P-26S 6 Head 12552

    $20,000 - Williamsport, PA, USA
    • Manufacturer: Weinig

    6-head (b-l-r-l-t-b), working cap. 9-1/16" x 4-11/16" grooved bed moulder head sequence: bottom 10 hp, right & left by 10 hp, top 10 hp and bottom 10 hp motor. mechanical brakesall spindles spindle...

  • 1994 SCM SUPERSET 23 12721

    $14,000 - Williamsport, PA, USA
    • Manufacturer: SCM

    used scmi superset 23 9″ x 5″ 5-head moulder. 9hp first bottom head motor, 12hp left and right shared side head motor, 12hp top head motor, 9hp second bottom head motor, 1 13/16″ diameter spindles,...