• power former "Eckold"

    No price - Dagmersellen, Switzerland Recently Added
    • Manufacturer: ECKOLD
    • Weight: approx. 40 kg

    weight: approx. 40 kg

  • 750mm Foam Sandwich Panel Line

    No price - Roxboro, NC, USA

      line speed: 12 mpm / 39.4 fpm | manufacture: 2001 | panel widths: 600-750mm / 23.6 - 29.5" | entry coil size: id - 500mm / 19.7" od - 1300mm / 51.2" wt - 8 mtons / 17,500lbs | panel cut lengths: 2...

    • Ring former rotating table machine

      No price - Ferrara, Italy
      • Manufacturer: COMAC

      ring former rotating table machine, make comac mod. 5010 ph - yom 1990 section sizes and minimum inside bending diameter (table based upon steel 40 kg/mm tensile) 35 x 4 diam 350 50 x 5 diam 600 70...

    • 20 ga. TIN KNOCKER Fourplex Cleat Former

      No price - Port Orange, FL, USA Recently Added
      • Manufacturer: TIN KNOCKER

      20 ga. fourplex cleat former poly-functional machine configured with s & drive down the center and choice of either male & female button lock or 3 in 1 and pittsburgh rolls, comes standard with s &...

    • 20 ga. TIN KNOCKER Button Lock Roll Former

      No price - Port Orange, FL, USA Recently Added
      • Manufacturer: TIN KNOCKER

      20 ga. button lock roll former 9 station button lock rollformer means no hammering over of edges. the button lock roll former comes with "male" tooling on one side and "female" on the opposing side...

    • 1997 WAFIOS BM 4 3D CNC Wire former

      No price - Hesse, Germany
      • Manufacturer: WAFIOS

      3d cnc wire former wafios bm 4 used machine wire diameter range: 3,0 - 8,0 mm wire feeding length: unlimited wire feding speed: max. 80 m/min output: depending from the parts; ready for operation

    • Piano former planer

      No price - Mogliano Veneto, Italy

        part machined 4800mm x 1520mm x 260mm (h) ex planer kg 7300

      • Flagler Model H-2 12-7

        No price - Salt Lake City, UT, USA
        • Manufacturer: Flagler
        • Weight: 500 lbs

        specifications: this machine is standard equipped with no tooling in the center position. there are (2) sets of extended shafts to form any of the auxillary rolls shown below. speed: approx. 30 or ...

      • Flagler Model H-2 12-10

        No price - Salt Lake City, UT, USA
        • Manufacturer: Flagler
        • Weight: 1050 lbs

        specifications: this machine is standard equipped with no tooling in the center position. there are (2) sets of extended shafts to form any of the auxillary rolls shown below. speed: approx. 30 or ...

      • Flagler High Speed Quadformer

        No price - Salt Lake City, UT, USA
        • Manufacturer: Flagler
        • Weight: 1200 lbs

        specifications: standard with reinforced "s" cleat & 1 1/8" drive cleat tooling in the center position. there are (2) sets of extended shafts to form any of the profiles shown at the bottom of the ...