• Cincinnati Verci-Power Vertical Bed Type Mill. 3

    • Manufacturer: Cincinnati

      cincinnati 650-20 vercipower vertical mill, 104 ½” x 20” table, 50 hpspecifications:table working surface    104 ½” x 20”t-slots, no/size    3/ 13/16”distance between t-slots    4.25”longitudinal travel range    ...

      No price
      Wixom, MI, USA
    • 2001 SENECA FALLS EW 75 WITH MILLING MACHINE

      • Manufacturer: SENECA FALLS
      • Spindle Taper: #50 NMTB

      air supply: 80 psi | bed way width: 4" | spindle taper: #50 nmtb | approx. weight: 17,000 lbs | loading height: 43" | spindle speeds: 10 - 1150 rpm | currently wired: 575/3/60 | max traverse rate: 400 ipm | swin...

      No price
      Waukesha, WI, USA
    • ACER SUPRA CNC BED-MILL 1454 #3026

      • Manufacturer: Acer

        acer 14" x 54" bed-mill milling machine with fagor 8055i cnc control model: bed-mill 1454 specifications working surface: 54" x 14" longitudinal travel: 40" cross travel: 24" vertical knee travel: 28" t-slot size...

        No price
        Baltimore, MD, USA
      • NAKAMURA TOME WT-300MMSY 8-AXIS CNC TURNING/MILLING CENTER

        • Manufacturer: Nakamura
        • Spindle Bore: 3.1″
        • Spindle Nose: A2-6

        nakamura tome wt-300mmsy 8-axis cnc turning/milling center serial no. m300608                                  new 2005 equipped with fanuc 18i-tb cnc controls cylindrical interpolation polar coordinate interpola...

        No price
        Bannockburn, IL, USA
      • 1999 Southwest Industries Trak Model DPM Bed Type 3-Axis CNC Vertical Milling Machine

        • Manufacturer: Southwest Industries
        • Control: 70-4200 RPM

        equipped with: trak a.g.e. 3 (auto geometry engine) three-axis cnc -three-axis digital readout in manual mode -9" crt -dual floppy disc drives -rs 232 port, full three-axis cnc machining or handwheels for manual ...

        No price
        Farmingdale, NY, USA
      • 1996 Southwest Industries Trak Model DPM Bed Type 3-Axis CNC Vertical Milling Machine

        • Manufacturer: Southwest Industries
        • Control: 70-4200 RPM

        equipped with: trak a.g.e. 3 (auto geometry engine) three-axis cnc -three-axis digital readout in manual mode -9" crt -dual floppy disc drives -rs 232 port, kurt pneumatic power draw bar, full three-axis cnc mach...

        No price
        Farmingdale, NY, USA
      • DOOSAN PUMA 400MB,MILLING FANUC 32,15"Chk 62454

        • Manufacturer: Doosan
        • Spindle Bore: 6"
        • Distance between Centers: 7

        doosan puma 400mb cnc turning center with milling new: 2010 swing over the bed...................... 30.3" swing over saddle....................... 23.2" distance between centers................ 44.7 maximum turn...

        No price
        Huntington, NY, USA
      • 2001 DAEWOO PUMA 230MB; 2001; Milling

        • Manufacturer: Daewoo

          equipped with: fanuc 18i-t cnc control collet chuck tool setter tailstock parts catcher

          No price
          South Elgin, IL, USA
        • 1993 Southwestern Industries TRAK TRM CNC Bed Mill

          • Manufacturer: Southwest Industries
          • Spindle Taper: #40 NST

          equipped with: complete with kurt power lock draw bar, prototrak mx2 cnc controls, 3-hp spindle drive motor, compliment of tool holders, owners manual

          No price
          Farmingdale, NY, USA
        • 1995 COMPUMILL #1500 4 AXIS CNC BED TYPE MILLING MACHINE 16490

          • Manufacturer: AXIS
          • Spindle Taper: #30 NST

          dynapath delta 50 4 axis cnc control ( conversational/g code ) rs232 port kurt power draw bar large assortment of tool holders baldor servo drives 3-1/2" floppy drive vise automatic lubrication system coolant system

          No price
          Des Plaines, IL, USA