• GIDDINGS & LEWIS CNC FRASER HORIZONTAL BORING MILL

    • Manufacturer: Giddings & Lewis

      5" spindle diameter g & l "numeripoint" m-400 control with crt on pendant - manual control #50 taper w/power draw bar pendant control spindle speeds 6 to 1120 rpm feeds- 0.0492 in -139.76 ipm head travel - 72" t...

      No price
      Cleveland, OH, USA
    • DAHLIH VERTICAL RIGID HEAD CNC KNEE MILL FRAME

      • Manufacturer: DAHLIH

        vertical rigid head cnc knee mill frame no control manual variable speed head 80-3800 rpm # 40 taper spindle pneumatic drawbar travels: x axis: 29-1/2" y axis: 16-1/2" (spindle) z axis: 6" knee: 20" (manual) ra...

        No price
        Cleveland, OH, USA
      • MIGHTY COMET MV-6 CNC BED MILL WITH DELTA DYNAPATH CONTROL

        • Manufacturer: Delta

          table size 13" x 49-1/2" maximum table load 1500 lbs. range: longitudinal (x) 40" cross (y) 20" head (z) 20" quill 5" distance from centerline of spindle to face of column 20" minimum/maximum distance, nose...

          No price
          Cleveland, OH, USA
        • 2013 BRIDGEPORT PROTOTRAK 2-AXIS CNC MILL HB-20560

          • Manufacturer: Bridgeport
          • Weight: 750 LBS

          size: 9″ x 48″ t-slot, no. & size: 3 on 2.5″ centers maximum height above floor: 47.25″ spindle taper: r8 spindle drive speed, inf. variable: 60 – 500 rpm (low), 500 – 4200 rpm (high) mild steel (manual): .75″ di...

          $10,500
          Bethlehem, PA, USA
        • 48" G & L CNC 60" SWING 61436

              48" giddings & lewis cnc vertical boring mill new:1988 government machine, very little use chuck diameter......................... 48" maximum swing.......................... 60" height under rail..................

              No price
              Huntington, NY, USA
            • CLAUSING KONDIA FV-1 CNC VERT MILL HB-20282IP

              • Manufacturer: Clausing

                longitudinal travel (x-axis): 36″ saddle travel (y-axis): 15″ knee travel: 16-1/2″ ram travel: 23″ throat distance: 6-5/8″ to 29-11/16″ spindle motor: vs, 3 hp, 3 ph, ac, 60 hz spindle speeds: 60-4,000 rpm spindl...

                $10,500
                Bethlehem, PA, USA
              • 12" x 60" Acra CNC Mill, Anilam 1100 CNC, 40 Taper, Air Power Draw Bar

                • Manufacturer: Acra

                  the acra cnc knee mills are fast and precise vertical milling machines built on a rugged frame and ideally suited for accurate milling, boring, and drilling operations. accuracy, speed, and reliability are achiev...

                  No price
                  Helena, AL, USA
                • ACER SUPRA CNC BED-MILL 1454 #3026

                  • Manufacturer: Acer

                    acer 14" x 54" bed-mill milling machine with fagor 8055i cnc control model: bed-mill 1454 specifications working surface: 54" x 14" longitudinal travel: 40" cross travel: 24" vertical knee travel: 28" t-slot size...

                    No price
                    Baltimore, MD, USA
                  • 1981 Field Kobediesel Single Column, Open-Side Type 6401166

                    • Manufacturer: Field Kobediesel
                    • Control: Manual Pendent

                    all new electrics, servo motors, servo drives, spindle drive and magnetics. table capacity depends on size of suitable or support spider used on main table.

                    No price
                    Hickory, PA, USA
                  • 1996 DeVlieg 43K-48 27937

                    • Manufacturer: Devlieg
                    • Spindle Diameter: 4"

                    serial no.: 9876 this machine was retrofit in 1996 by cnc engineering of enfield, ct fanuc omc 2-axis cnc control fanuc red-cap servo drives updated fanuc red-cap servo motors & drives for x & y axes new ball scr...

                    No price
                    Melville, NY, USA