• 2012 DoAll C-916 HORIZONTAL BAND SAW WITH POWER FEED TABLE

    No price - Detroit, MI
    • Manufacturer: Doall
    • Motor: 3 Horsepower

    doall c-916, 9"x16" rect, 10.75" rnd, fd tbl, vice, pneum hd, stops, 24" length, 2012 equipped with: feed table powered band brush & band door locks band tensioner & vice adjustable pressure adjust...

  • 1997 HEM VERTICAL AUTOMATIC CUTOFF SAW

    No price - Detroit, MI
    • Manufacturer: Fast
    • Motor: 5 HP
    • Weight: 5,500 lbs

    manufactured in 1997 specifications capacity @ 90 deg: 18” x 20” t capacity @ 45 deg: 18” x 14” t max tilt to right: 45 degrees max tilt to left: 45 degrees head tilt (manual / powered): powered th...

  • MARVEL SERIES 8 MARK III VERTICAL BANDSAW

    No price - Detroit, MI
      • Motor: 5 HP
      • Weight: 3,000 lbs

      capacity @ 90 degree………….. 18” x 22” capacity @ 45 degree………….. 18” x 13” max tilt to right…………………… 60 degrees max tilt to left…………………….. 60 degrees head tilt (manual / powered)… powered degree of ...

    • 1989 20" x 20" Amada Model HA-500 Automatic Horizontal Band Saw

      No price - Elk Grove Village, IL
      • Manufacturer: Amada
      • Motor: 7.5 HP

      automatic, 20" x 20" capacity capacity: 20" w x 20" h | blade speed: 59-472 ft/min @ 60 hz | blade width: 1.5" | eqiupped with: shuttle vise, main vise | main motor drive: 7.5 hp | programmable fee...

    • WALKER TURNER 1100

      $2,250 - Matthews, NC Recently Added
      • Manufacturer: Walker

      walker turner series 1100 radial arm saw 220 volt, single phase motor hard to find model.

    • 2003 SCMI Sigma 105C Plus

      $39,900 - Matthews, NC Recently Added
      • Manufacturer: SCM

      scmi - model sigma 105c plus front-load panel saw | used maximum cutting width: 126" blade projection: 105mm (4.13") main saw motor: 24 hp, 220/440v, 3ph scoring motor: 2.4 hp, 220/440v, 3ph seven ...

    • DAVIS & WELLS UNK

      $1,450 - Matthews, NC Recently Added
      • Manufacturer: FAIR

      davis & wells table saw | used cast iron table 5 hp motor 0-45 degree tilt no blade guard

    • 2001 Homag Optimat CH-03/38/38 Plus

      $29,900 - Matthews, NC Recently Added
      • Manufacturer: Homag

      used homag - optimat ch-03/38/38 plus horizontal panel saw cutting length: 149" main saw motor: 7.5 hp scoring motor: 0.75 hp main blade diameter: 300mm six rear grippers side alignment device thre...

    • 2012 NORTHTECH NT SRS-12

      $9,950 - Matthews, NC Recently Added
      • Manufacturer: NORTHTECH

      northtech nt srs-12 straight line rip-saw used minimum working length: 200 mm, maximum thickness: 85 mm, distance between saw and column: 460 mm, saw arbor motor: 15 hp, saw arbor speed: 4,500 rpm,...

    • ROBLAND Z320

      $4,999 - Matthews, NC Recently Added
      • Manufacturer: Robland

      robland sliding table saw model z320 126" crosscut capacity with swing arm support and scoring capability, 16 inch max blade size with 3  3/4 inch scoring blade 7.5 hp main motor, .75 hp scoring mo...