search
  • 1998 Piovan - RPA1500 (1998) - 880 CFM Piovan Mould Dryer / Dehumidifier

    No price - Worcester, MA

      kw: 8.5 | voltage: 460/3/60 | water flow: 1585 gal/h | cfm throughput: 880 | cooling water temp:

    • 2000 Piovan - RPA800 (2000) - 470 CFM Piovan Mould Dryer / Dehumidifier

      No price - Worcester, MA

        kw: 7.5 | voltage: 460/3/60 | dew point: 5ºf | water flow: 950 gal/hr | cfm throughput: 470 | in/out pipe diameter: 7.87''

      • 1998 Piovan - RPA2000 (1998) - 1175 CFM Piovan Mould Dryer / Dehumidifier

        No price - Worcester, MA

          kw: 9.3 | voltage: 460/3/60 | water flow: 1850 gal/hr | cfm throughput: 1175 | cooling water temp:

        • Fisher & Paykel MD15 15 TON MODEL "DIESECTOR" VERTICAL DIE SEPARATOR

          No price - Holland, OH
          • Manufacturer: Fisher & Paykel
          • Weight: 33,070 LBS

          model .......................... md15 platen shut width .............. 24" platen open width .............. 93" max mould weight ............... 33,070 lbs platen datum height vertical ... 44" plat...

        • 2008 CATERPILLAR D11T

          $315,926 - Austell, GA
          • Manufacturer: Caterpillar
          • Model: D11T
          • Hours: 24009

          > machine was started up, run for approx 5 minutes only due to very low fuel level. no significant operational testing done due to low fuel level and machine partially disassembled for transport. ...

        • 2004 POWER CURBERS 5700B

          $9,500 - Marion, WI
          • Manufacturer: Power curbers
          • Model: 5700B

          sidewalk mould for power curber - expandable 5-6' sidewalk mould w/2 vib and support brackets

        • 2005 [Other] thers PSI M413XT

          $45,000 - Westbrook, ME Recently Added
          • Manufacturer: [Other]
          • Hours: 4000 h

          full cab, a/c and heat. with ripper and loader bucket, 10ft mould board, deutz diesel, 131hp, 4x4 all wheel drive, new tires accepts skidsteer attachments front and rear with 3rd valve for front an...

        • 1988 Boy 22SVH

          $5,750 - Morrisville, PA Recently Added
          • Manufacturer: Boy

          boy vertical injection mold machine injection unit: screw diameter - 28mm pressure on material - 1069 bars shot volume - 39cm3 closing unit: clamping force - 22 ton between tie-bars - 240mm x 24...

        • 1993 Boy 22SVH Dipronic

          $6,250 - Morrisville, PA Recently Added
          • Manufacturer: Boy

          boy vertical injection mold machine injection unit: screw diameter - 28mm pressure on material - 1069 bars shot volume - 39cm3 closing unit: clamping force - 22 ton between tie-bars - 240mm x 24...

        • 1997 Boy 22D

          $5,500 - Morrisville, PA Recently Added
          • Manufacturer: Boy

          boy horizontal injection mold machine injection unit: screw diameter - 28mm pressure on material - 1069 bars shot volume - 39cm3 closing unit: clamping force - 22 ton between tie-bars - 240mm x ...