Used nc vertical milling

- 226 listings found
Sort by Price: Low to High | High to Low
  • 1997 HURCO BMC-30/SSM VMC TK-19133

    • Manufacturer: Hurco

      Type: cartridge # 40 taper nose to table: 6″ – 30″ center to column ways: 17.5″ speeds: 80 – 8000 rpm torque (30 minutes): 105 lbs/ft at 500 rpm bearings: abec-7 class angular contact bearing lubrication: grease ...

      No price
      Bethlehem, PA, USA
    • 2014 Lagun Gornatu GTM 2 10415

      • Manufacturer: Lagun

        Heidenhain tnc 640 cnc control automatic tool changer – 40 position electronic handheld control nc rotary table 0.001 degree nc rotary table equipped with turning function maximum – 400 rpm nc orthogonal milling ...

        No price
        Marietta, GA, USA
      • 2013 CHIRON FZ-12KS

        • Manufacturer: Chiron
        • Control: Fanuc

        Travel: --x: 550 mm --y: 320 mm --z: 360 mm (plus distance from spindle nose to table surface) drilling capacity in steel 18mm tapping capacity m 16 milling capacity in steel 80 cm3/min digital main drive with wa...

        No price
        Altamonte Springs, FL, USA
      • 1996 Nicolas Correa FP-30/40 10072

        • Manufacturer: Correa
        • Spindle Taper: ISO 50

        Heidenhain tnc-426 cnc control automatic tool changer – 60 position continuous milling head – 2-axis – model nc c5e through spindle coolant dual chip conveyor built-in hydro-mechanical tool clamp fully independen...

        No price
        Marietta, GA, USA
      • OKUMA VTM-120YB VERTICAL LATHE WITH B/Y AXIS MILLING

        • Manufacturer: Okuma

          Okuma vtm-120yb vertical lathe with b/y axis milling control osp 200l chuck diameter 40" maximum cutting diameter 47.24" maximim swing diameter.. 59" maximum turning length. 39" maximum workpiece load.. 5,500 lb...

          No price
          Warren, MI, USA
        • 1987 Schiess FB 180 Ram Type 23711

          • Manufacturer: Schiess
          • Spindle Diameter: 7.08"

          Heidenhain 7 axis cnc 530i cnc control 60-station automatic tool changer rotary table heidenhain 7 axis cnc 530i cnc 60-station automatic tool changer universal milling head angular head nc facing head chip conve...

          No price
          Melville, NY, USA
        • MAKINO BNⅡ-85 Vertical Precision NC milling machine

          • Manufacturer: Makino

            Xyz 850x500x400 fanuc 15m spindle speed 10~4000rpm、3 axis feed back scale

            No price
            Taichung City, Taiwan
          • 1992 CNC milling machine SHW UFZ 4

            • Manufacturer: SHW

              Cnc machining center shw ufz4 new cnc control heidenhain 530i workspace x 1800 mm y 1300 mm z 900 mm feed speed 0-1200 mm / min rapid traverse 12000 mm / min spindle speed max. 3000u / min vertical / horizontal s...

              No price
              Schwäbisch Gmünd, Germany
            • Deckel FP 42 NC

              • Manufacturer: Deckel Maho
              • Model: FP 42 NC
              • Spindle Taper: 40

              Tool milling machine travel x: 1170 mm travel y: 370 mm travel z: 370 mm numerical command: num 1040 - year 1995 turning table (length x width): 800 x 600 mm spindle:sa 40 panel on connector harting tension: 380 ...

              No price
              France
            • 2005 Toshiba MPC2665B 26258

              • Manufacturer: Toshiba
              • Capacity: 88,000 Lbs
              • Weight: 88,000 Lbs

              Fanuc 15i-mb cnc control 180-station automatic tool changer 88,000 lb pallet weight capacity 5-face machining fanuc 15i-mb nc control 180-position automatic tool changer pallet shuttle with twin pallets automatic...

              No price
              Melville, NY, USA