• Sentinel / P Sentinel 1600 Blister Former

    • Manufacturer: Sentinel / P

      serial no. 960-77-010 voltage: 220 volt ac / 3 phase / 65 amps. 1. replace worn link pins and bushings on trim station. 2. replace cracked upper trim station platen. 3. install five (5) moveable guards in oven ar...

      No price
      Cleveland, OH, USA
    • GPD CF-10 Radial Lead Former

          120 vac *capable of forming loose radial components at rates up to 6,000 parts per hour with a variable speed motor. *feed components by hand or with tubes (to-220s) *reduce setup time with quick change tooling a...

          No price
          Magnolia, TX, USA
        • 2014 PAVE AXIS VI MK III CNC MULTI AXIS WIRE FORMER

              the 2014 axis 6 is made by pave. it is a single arm, multi- axis, cnc wire forming machine. the machine is capable of forming wire from 2mm up to 6mm in diameter. this machine uses only one forming tool, but has ...

              No price
              Holland, OH, USA
            • SWF SWF1D5A #14585

              • Manufacturer: SWF

                capable of speeds up to 20 bliss trays per minute (depending on case size). has a tray size range: 7" to 34" l, 8-1/8"-22"w, 1"-12"d w/ proper change parts. knockdown case range: 10-1/2" - 27 7/8"l, 12"-36"w. 3ph...

                No price
                Ball Ground, GA, USA
              • 1999 DOUGLAS SSTF #8719

                • Manufacturer: DOUGLAS

                  quick change machine that requires no change parts, fully adjustable from size to size. capable of speed 15-30 trays/minute depending on size and applications. tray size range: 7-9/16" to 11-3/16" direction of tr...

                  No price
                  Ball Ground, GA, USA
                • 2003 RA PEARSON H165 #8086

                  • Manufacturer: Pearson

                    traypacker set up to run 38 trays per minute, but is capable of 55 trays per minute. includes q2010 high-capacity tray magazine, cluster lubrication, nordson 3700 glue unit, a nema 4 enclosure, and an allen- brad...

                    No price
                    Ball Ground, GA, USA
                  • Used- Wexxar Automatic Self Locking Corrugated Tray Former, Model AT-SL4

                    • Manufacturer: Wexxar

                      41177304 used- wexxar automatic self locking corrugated tray former, model at-sl4. capable of up to 30 trays per minute depending on type and size. self-locking or tab lock style trays. tray size range: length 11...

                      No price
                      Bensenville, IL, USA
                    • National 1250 7473C

                      • Manufacturer: National

                        - hydraulic clamping of dies and punches - rmg wire payoff unit - standard nut former transfer - custom sound enclosure - very low hours. only apprx. 11,000 parts have been run since the rebuild. - also includes...

                        No price
                        Grand Rapids, MI, USA
                      • 14 Ton CUSTOM 2-Hit High Speed Tube End Former #850

                        • Manufacturer: CUSTOM

                          clamping via air toggle clamp, one at each station interlocked with press single back geared machine mechanical clutch, knife type this is a unique horizontal press type tube & small wire diameter end former. pa...

                          No price
                          Perrysburg, OH, USA
                        • 2004 LITTLE DAVID CF30 #14888

                          • Manufacturer: LITTLE DAVID

                            previously used to fold, close and tape boxes for manufactured parts. capable of speed up to 10 cases per minute. can handle cases with these dimensions: length 8"-18", width 8"-15" and height 6"-18". overall dim...

                            No price
                            Ball Ground, GA, USA