search
  • GRIPNAIL PIN WELDER PINSPOTTER, FLOOR RW-7000

    No price - McClellan Park, CA
    • Manufacturer: GRIPNAIL

    model: rw-7000 motor: single phase, 208/230 volt kva: 5.3 fusing: 50 amps air required: 8 psi minimum, 1/2" nps connection air consumption: 7.0 cfm @ 80 psi w/tip cooling operating 1.0 cfm @ 80 psi...

  • PRO WELD CD250P SOLID STATE STUD/PIN WELDER

    No price - McClellan Park, CA
    • Manufacturer: PRO WELD

    model: cd 250 p important conditions of this quotation: all relevant facts about the above machinery are believed to be accurate, but none are guaranteed. it is the sole responsibility of the buyer...

  • Duro Dyne Rolling Head Pinspotter

    No price - Charlotte Hall, MD
    • Duro-Dyne Pinspotter

      No price - Salt Lake City, UT
      • Manufacturer: JMT

      duro-dyne pinspotter – automatic bulk feeding system – nail length 1/2 to 2″ – electrics: voltage 220 horse power 1 – kva 10 – head stationary – throat 44″ – fuse (amp’s required) 30 – dimensions: ...

    • DURO-DYNE CCD110 PINSPOTTER, COMPACT CAPACITOR DISCHARGE PINSPOTTER #27120

      No price - McClellan Park, CA
      • Manufacturer: DURO-DYNE
      • Weight: 10.5 LBS

      model: ccd110 durodyne item#27120 will weld pins: 1/2" up to 4" long in steel 26 to 20 gauge electrical: 110v, single phase actual dimensions: 11"l x 10"w x 7"h weight: 10.5 lbs. the ccd110, capaci...

    • DURO DYNE RH-MACH-III ROLLING HEAD PINSPOTTER, 18 GAUGE, #18005

      No price - McClellan Park, CA
      • Manufacturer: DURO DYNE
      • Weight: 735 LBS

      model: rh-mach-iii durodyne item# 18005 dimensions: 90" x 42" x 73"h approx weight: 735 lbs. rolling head pinspotter capable of welding up to 4" pins to 18 gauge rh mach iii welds bdep, ctc, ssp, c...

    • GRIPNAIL 7100 PINSPOTTER, PORTABLE PIN-WELDER

      No price - McClellan Park, CA
      • Manufacturer: GRIPNAIL
      • Weight: 74 lbs

      model: 7100 input voltage: 190-240 vac 60hz, 1 phase input current: 30 amp single phase: 50/60 cycle kva rating: 5.3 kva duty cycle: 50% fusing: 50 amp open circuit secondary volts: 5.82 vac short ...

    • DURO-DYNE MF-12A PINSPOTTER, PORTABLE COMPACT, #27110

      No price - McClellan Park, CA
      • Manufacturer: DURO-DYNE
      • Weight: 120 LBS

      model: mf-12a durodyne item#27110 will weld pins: 1/2" up to 2" long in steel up to 18 gauge electrical: 208-230v, 60hz, single phase 60 amp service dimensions: 11"l x 17"w x 11"h weight: 120 lbs. ...

    • DURO DYNE PBF-510 PINSPOTTER, PORTABLE, HIGH-CAPACITY

      No price - McClellan Park, CA
      • Manufacturer: Capacity

      model: pbf-510 pins: 1/2" to 2" pins through: 26 to 18 gauge mild steel electricals: 208-230v, 60 hz, single phase amp: 100 amp service dimensions: 32"h (handle height 37") x 17"w x 26"d duro-dyne ...

    • DURO DYNE FG-MACH-III "WIDE MOUTH" PINSPOTTER, 18 GAUGE, #18004

      No price - McClellan Park, CA
      • Manufacturer: DURO DYNE

      model: fg mach iii durodyne stk# 18004 see attached .pdf for detailed specs electrical: input voltage: 230v, 60 hz single phase, 60 amp service. air requirement: input pressure of 80 psi throat: 69...