• 2009 LEADERMAC LMC-518S MOULDER (FEED THROUGH)

    $19,772 - Charlotte, NC, USA
    • Manufacturer: LMC
    • Elect./Voltage: 460 V, 60 Cy, 3 Ph

    elect./voltage: 460 v, 60 cy, 3 ph leadermac lmc 518 s "smartmac" feed through moulder; 5-head (b-r-l-t-b) with a working cap. of 7" x 5".head sequence: bottom 7.5 hp, right/left 15 hp, top 15 hp a...

  • Planer 4 Used MIDA faces - P4E kind - capacity 450 mm x 200 mm - 4 tool hol

    $19,107 - Nevers, France
    • Manufacturer: Capacity

    planer 4 used mida faces - p4e kind - capacity 450 mm x 200 mm - 4 tool holders - top height 200 mm - 10 hp planer - planer hp 7.5 - 7.5 x2 tops cvs - advance 5-13m / min

  • Guilliet - Planers 4-door type tools KXY - Capacity 180 x 120 mm (wood fini

    $7,005 - Nevers, France
    • Manufacturer: Capacity

    guilliet - planers 4-door type tools kxy - capacity 180 x 120 mm (wood finish) - table input 1.60m

  • HEMAG corrugator 4 sides used molding machine - type COROPROFIL320 - 5 tool

    $36,091 - Nevers, France
    • Manufacturer: HEMAG

    hemag corrugator 4 sides used molding machine - type coroprofil320 - 5 tool holders - capacity 320 mm x 160 mm - input table 2000 mm - lower and upper planer with counter bearing - tool holder Ø 12...

  • WEINIG molding machine - UNIMAT 23 type - with 10 tool holders - grooved ta

    $63,690 - Nevers, France
    • Manufacturer: Weinig

    weinig molding machine - unimat 23 type - with 10 tool holders - grooved table - top / bottom drive - short wooden device - 3 m entry table - chrome table - ats on 2nd top planer and on 2nd left ro...

  • Used SCM Moulder - Type SUPERSET 23+ - Width 230 mm - Height max 120 mm / m

    $31,845 - Nevers, France
    • Manufacturer: SCM

    used scm moulder - type superset 23+ - width 230 mm - height max 120 mm / min 6 mm - input table 2000 mm - slot table - 7 tool holders: planer, straight spindle, , planer 7.5 kw, planer, planer, un...

  • 1977 Kupfermuehle Vuin 760 Planer and moulder for coffins

    No price - Bavaria, Germany
    • Manufacturer: Kupfermuehle

    condition 2 working width 760 mm working height 200 mm working height 4-side 85 mm number of spindles 5 spindle configuration planer bottom-top, moulder top, moulding spindle right+left spindle dia...

  • HARBS 170/4 4-side Planer m. Tersa planing heads

    $4,388 - Roßleithen, Austria
    • Manufacturer: Harbs

    working width 170 mm working height of vertical shafts 120 mm 1. u - dressing shaft Ø 40 mm 4,0 kw 2. r - vertical shaft Ø 40 mm 5.5 kw 3. l - left 40 mm 5.5 vertical shaft Ø kw 4. o - top horizont...

  • 2008 MAKA/Griggio G240P, CE Heavy 4-sided Planer roll forming machine

    $15,150 - Enschede, Netherlands
    • Manufacturer: Griggio

    technical description -4 plane waves = u - r - l - o * dressing spindle with referentzfraes, tool diameter max 150 mm, motor power 7,5 hp (braked) * right vertical spindle, max tool diameter 200 mm...

  • 1992 KUPFERMUEHLE VUIN-plus 4-sided Planer

    No price - Fribourg, Switzerland
    • Manufacturer: Kupfermuehle

    4-sided planer kupfermuehle vuin-plus complete with soundproof cabin (available from march 2017) planing width: 600 mm planing width: min. 50 mm planing height: max 200/250 mm tool shaft diameter ...