• 1952 WEBB 1/4" x 96" R3L Initial Pinch Plate Bending Roll

    No price - Farmingdale, NY, USA
    • Manufacturer: Webb
    • Model: R3L

    equipped with: power rear roll adjustment, drop end, electric foot switch, forward & reverse

  • ROUNDO PS205 PLATE BENDING ROLL

    No price - United States
    • Manufacturer: Roundo
    • Capacity: 6' x 3/8"

    equipped with dimensions and weight 125"x 43"x 49" 3175mm x 1092mm x 1245mm 9000 4082 kg

  • 2014 Parmigiani NC 4-Roll Hydraulic Plate Bending Roll #2899

    No price - Ronkonkoma, NY, USA
    • Manufacturer: Parmigiani
    • Capacity: 5/8"

    parmigiani nc 4-roll hydraulic plate bending roll model vbh 10/380 new 2014 overall bending length ............ 10 ft. capacity........................... 1" pre-bend capacity ................. 5/8...

  • Americor Hydraulic 4-Roll Double Pinch Plate Bending Roll #2872

    No price - Ronkonkoma, NY, USA
    • Manufacturer: Americor

    used americor hydraulic 4-roll double pinch plate bending roll model 4rdp 180/6 capacity........................... 6 ft. x 1/4" mild steel roll diameter...................... 7.08 in. weight.........

  • 1974 Bertsch Initial Pinch Plate Bending Roll #2465

    No price - Ronkonkoma, NY, USA
    • Manufacturer: Bertsch
    • Capacity: 1-1/4" x 3 ft
    • Weight: 37,100 lbs

    used bertsch initial pinch plate bending roll model 14 new 1974 bending capacity .................... 1-1/4" x 3 ft diameter of top roll ................ 14" overall length of top roll .......... 4...

  • 5/8" x 8' Montgomery Model 4-9650 4 Roll Double Pinch Plate Bending Roll

    No price - Elk Grove Village, IL, USA
      • Capacity: 98" X 5/8" (in mild steel)

      roll speed: 17 fpm | equipped with: double pinch, hydraulic drop end | roll diameter: 11" | number of rolls: 4 | main motor drive: 25 hp | nominal rated capacity: 98" x 5/8" (in mild steel) | over...

    • JMT HRB-4 3006 4-ROLL PLATE BENDING ROLL

      No price - United States
      • Manufacturer: JMT

      equipped with dual speed control (fast / slow) cone bending hydraulic drop end hydraulically driven top and bottom rolls electronically positioned side rolls dimensions and weight 0"x 0"x 0" 0mm x ...

    • 2002 .500" x 10' Imcar Comac Model SIHR 12/5 Hydraulic Plate Bending Roll

      No price - Elk Grove Village, IL, USA
        • Capacity: 1/2"

        status: under power | equipped with: hyd closure/ hyd lower rolls/ cone attachment and section, rolling dies/ digital readouts | number of rolls: 3 | bending capacity: 1/2" | overall length of rol...

      • SIMAG 12' X 1-1/4" PYRAMID PLATE BENDING ROLL

        No price - United States
          • Capacity: 12' x 1-1/4"

          equipped with 33.5 hp main drive motor 24.98 kw main drive motor power adjustment to all three rolls (3) roll adjustment motors (21 hp each) (3) roll adjustment motors ( 15.66 kw each) hydraulic dr...

        • 16 Ga. x 36" Niagara Initial Type Motor Driven Pinch Roll

          No price - Farmingdale, NY, USA
          • Manufacturer: Niagara

          equipped with: electric foot pedal, manual roll adjustment, forward & reverse, rolls grooved for wire