• No. HLVH-EM, HARDINGE, S/N 9290-T, NEW 1980

    • Manufacturer: Hardinge

      norwood machinery sales, llc 100 broadway,norwood, ma 02062 phone #: 781-440-0983 fax #: 781-769-9486 e-mail web site specification sheet hardinge high speed super precision 10" tool room lathe model hlvh-em s...

      No price
      Norwood, MA, USA
    • SHARP #2146

      • Manufacturer: Sharp

        new sharp high precision tool room lathe model: 1118h specifications capacity: swing over bed:  11" swing over carriage:  9" swing over cross slide:  6" distance between centers:  18" spindle: with round 5c colle...

        No price
        Baltimore, MD, USA
      • ACRA ATL-618EVS #3035

        • Manufacturer: Acra

          new acra 11" x 18" super precision tool room lathe model: atl-618evs features: swing over bed: 11" swing over cross slide: 6" spindle speed: 0 ~ 4,000 spindle nose: 5c (10") / 4" x taper main motor: 3 hp voltage:...

          No price
          Baltimore, MD, USA
        • NEW BAILEIGH PL-1860E 18" x 60" Metal Lathe #PL-1860E

          • Manufacturer: Baileigh

            please note: many products ship straight from manufacturer 18" x 60" metal lathe if you are looking for a large tool room lathe at a good price, take a look at the baileigh industrial pl-1860e metal lathe.  the p...

            No price
            Port Orange, FL, USA
          • 1963 Schaublin 120 VM

            • Manufacturer: Schaublin
            • Spindle Bore: 25mm

            motor: 1,5/2,7hp | width: 700mm | height: 1250mm | length: 1650mm | weight: 880kg | spindle bore: 25mm | center height: 120mm | spindle speed: 65-1750rpm | center distance: 600mm

            No price
            Värnamo, Sweden
          • Schaublin 102 VM

            • Manufacturer: Schaublin
            • Spindle Bore: 25mm

            motor: 1,5/2,7hp | width: 700mm | height: 1250mm | length: 1650mm | weight: 880mm | spindle bore: 25mm | center height: 120mm | spindle speed: rpm | center distance: 600mm

            No price
            Värnamo, Sweden
          • Hardinge HLV-EM

            • Manufacturer: Hardinge
            • Model: HLV-EM
            • Distance between Centers: 18"
            • Spindle Nose: 4 Degrees Taper

            hardinge 3 jaw chuck 2- racks of 5c collets trak 2 axis digital readout inch/metric threading taper attachment aloris tool post coolant pump drill chuck work light 5c collet closer

            No price
            South El Monte, CA, USA
          • Acra 618CTL

            • Manufacturer: Acra
            • Spindle Nose: 5C (10°) / 4° x Taper

            5c lever collet closer special tools direct reading spindle speeds tool holder electronic threading d.r.o. coolant system

            No price
            South El Monte, CA, USA
          • 14" Swing 40" Centers Birmingham YCL-1440GH ENGINE LATHE

            • Manufacturer: Birmingham
            • Spindle Nose: (spindle mount) D1-4

            new 'birmingham' 14" x 40" precision gap bed tool room lathe model: ycl-1440gh specifications: swing over bed: 14" between centers: 40" max swing over cross slide: 8-5/8" max swing in gap: 20" width of bed: 8-1/8...

            $5,550 (USD)
            Harrison, NJ, USA
          • HAFCO METALMASTER AL-1324

            • Manufacturer: Metalmaster

              order code: l201manufactured in taiwanfeatures: - tool room quality precision lathe, made in taiwan and have been sold for over 20 years- gear drive headstock for quick change of spindle speeds- stand increasing ...

              $6,846 (USD)
              North Rockhampton, Australia

            Have 5 seconds to help us improve the results?

            I'll do it
            No thanks