Used press forging

- 358 listings found
Sort by Price: Low to High | High to Low
  • ZTS LE-250

    • Manufacturer: ZTS
    • Capacity: 250.00 ton 2491 kN

    Height listed is above floor total height is 142 inches (3610 mm)

    No price
    Washington, PA, USA
  • 1984 ZTS LE-400 Gap / C Frame Cold Press

    • Manufacturer: ZTS
    • Capacity: 400.00 ton 3985 kN
    • Stroke: 6.30 in 160.00 mm

    Throat size 18 inch (450mm), height shown is above floor level, number of strokes admitted per minute 20

    No price
    Washington, PA, USA
  • 100 TON WILKINS & MITCHELL HOT FORGING PRESS

        Rebuilt and retrofit 2017 to hot forge bolt tonnage 100tons capacity m42 dia length 800 stroke 8" spm 45 shutheight 24" bed area 30" (front to back) 40" (left to right) equipped w...

        No price
        Newark, NJ, USA
      • 700 TON NATIONAL MAXIPRESS FORGING PRESS

        • Manufacturer: National
        • Stroke: 8"

        700 ton national maxipress spm .................. 90 stroke ............... 8" shut height .......... 21-9/16" - 22" tie rod dia. ......... 6-3/4" floor space .......... rl 8'11" fb 8'6" h...

        No price
        Newark, NJ, USA
      • Hydraulic Press Manufacturing Co 10018

        • Manufacturer: Rexroth
        • Stroke: 1,000 mm

        press daylight: 2,489 mm | total power supply: 2,764 kw | normal press stroke: 1,000 mm | hydraulic pumps (main): axial piston pump x 8 set | advance speed - fast/slow: 250/10 mm/s | hydraulic pumps total flow: ...

        No price
        Marietta, GA, USA
      • 10462

        • Manufacturer: SEC
        • Stroke: 1,500 mm

        Tool shifting device – stroke 4,000 mm / 157.5″ top die clamping device – 20 ton die magazine device – stroke 3,300 mm / 130″

        No price
        Marietta, GA, USA
      • NATIONAL MAXI-PRESS FORGING PRESS LINE

        • Manufacturer: National

          8000 ton national maxipress forging press national all reconditioned-2012 capacity tie rod diameter die seat ram area stroke shut height speed equipped with 500/125 hp 460/60/3 main drive motor upper knockout-4"...

          No price
          Warren, MI, USA
        • MODEL NO. SE2-2500-132X66, 2500 TON BLISS PRESS

          • Manufacturer: Bliss

            Equipped with: stations - 3 ejector tonnage - 100 ton specifications: tonnage.........................................2500 ton stroke..........................................60" strokes / min....................

            No price
            Warren, MI, USA
          • 1983 Aida CFT-60 600-Ton Cold Forging Press DANA00000453

            • Manufacturer: Aida

              Open time: 12 july 2017 12:00 am et / close time: 28 december 2017 05:00 pm et 1983 aida cft-60 600-ton cold forging press. serial number: 16100-0017. dim: 117 w x 6060mm l x 6390mm. h. stroke 250"". est. weight ...

              No price
              Querétaro, Mexico
            • Lasco VPE 1000 Closed die forging presses

              • Manufacturer: Lasco
              • Capacity: 1000 t
              • Stroke: 800 mm

              stroke: 800 mm | daylight: 1850 mm | return speed: 400 mm/sec | lower ejector: 100 t | upper ejector: 100 mm/sec | press capacity: 1000 t | mode of operation: oil hydraulic | ram (front to back): 1400 mm | ram (...

              No price
              Reinach, Switzerland