Used presses and forging machines

- 286 listings found
Sort by Price: Low to High | High to Low
  • ZTS LE-250

    • Manufacturer: ZTS
    • Capacity: 250.00 ton 2491 kN

    Height listed is above floor total height is 142 inches (3610 mm)

    No price
    Washington, PA, USA
  • 1984 ZTS LE-400 Gap / C Frame Cold Press

    • Manufacturer: ZTS
    • Capacity: 400.00 ton 3985 kN
    • Stroke: 6.30 in 160.00 mm

    Throat size 18 inch (450mm), height shown is above floor level, number of strokes admitted per minute 20

    No price
    Washington, PA, USA
  • 700 TON NATIONAL MAXIPRESS FORGING PRESS

    • Manufacturer: National
    • Stroke: 8"

    700 ton national maxipress spm .................. 90 stroke ............... 8" shut height .......... 21-9/16" - 22" tie rod dia. ......... 6-3/4" floor space .......... rl 8'11" fb 8'6" h...

    No price
    Newark, NJ, USA
  • 100 TON WILKINS & MITCHELL HOT FORGING PRESS

        Rebuilt and retrofit 2017 to hot forge bolt tonnage 100tons capacity m42 dia length 800 stroke 8" spm 45 shutheight 24" bed area 30" (front to back) 40" (left to right) equipped w...

        No price
        Newark, NJ, USA
      • MODEL NO. SE2-2500-132X66, 2500 TON BLISS PRESS

        • Manufacturer: Bliss

          Equipped with: stations - 3 ejector tonnage - 100 ton specifications: tonnage.........................................2500 ton stroke..........................................60" strokes / min....................

          No price
          Warren, MI, USA
        • Hydraulic Press Manufacturing Co 10018

          • Manufacturer: Rexroth
          • Stroke: 1,000 mm

          press daylight: 2,489 mm | total power supply: 2,764 kw | normal press stroke: 1,000 mm | hydraulic pumps (main): axial piston pump x 8 set | advance speed - fast/slow: 250/10 mm/s | hydraulic pumps total flow: ...

          No price
          Marietta, GA, USA
        • 10462

          • Manufacturer: SEC
          • Stroke: 1,500 mm

          Tool shifting device – stroke 4,000 mm / 157.5″ top die clamping device – 20 ton die magazine device – stroke 3,300 mm / 130″

          No price
          Marietta, GA, USA
        • 1983 Aida CFT-60 600-Ton Cold Forging Press DANA00000453

          • Manufacturer: Aida

            Open time: 12 july 2017 12:00 am et / close time: 28 december 2017 05:00 pm et 1983 aida cft-60 600-ton cold forging press. serial number: 16100-0017. dim: 117 w x 6060mm l x 6390mm. h. stroke 250"". est. weight ...

            No price
            Querétaro, Mexico
          • Lasco VPE 1000 Closed die forging presses

            • Manufacturer: Lasco
            • Capacity: 1000 t
            • Stroke: 800 mm

            stroke: 800 mm | daylight: 1850 mm | return speed: 400 mm/sec | lower ejector: 100 t | upper ejector: 100 mm/sec | press capacity: 1000 t | mode of operation: oil hydraulic | ram (front to back): 1400 mm | ram (...

            No price
            Reinach, Switzerland
          • Presstec RPH-S 3500-1800/1500 Closed die forging presses

            • Manufacturer: SEC
            • Capacity: 3500 t
            • Stroke: 1500 mm

            stroke: 1500 mm | daylight: 2200 mm | total weight: 320 t | press capacity: 3500 t | working pressure: 320 bar | mode of operation: hydraulic | speed at max. press force: 400 mm/sec | height of machine above flo...

            No price
            Reinach, Switzerland