• Asahi Seiki TP45

    $129,000 - Watertown, CT, USA
    • Manufacturer: Asahi Seiki

    make: asahi seiki model: tp45 serial no.: 60614 new in march, 1985 2.5" stroke 3" center distance 330.02mm shut height 40-150 spm air clutch and brake antivbration feet leveling feet 12 station die...

  • Asahi-Seiki TP-45

    $134,500 - Watertown, CT, USA
    • Manufacturer: Asahi-Seiki

    make: asahi-seiki model: tp-45 serial: 81113 12 station die set w/ slide & transfer cam 2 row cut asahi stagger feed asahi 16 station die protection ross duel safety solenoid valves square d pneuma...

  • Bliss 5012

    $45,500 - Watertown, CT, USA
    • Manufacturer: Bliss

    make: bliss model: 5012 12  station transfer press 7.5" stroke 6.75" shut height 3.5" transfer pitch air clutch peterson roll feed overarm drive model ddr66g p/a industries scrap chopper model sc6 ...

  • Grotnes 15S

    $12,450 - Watertown, CT, USA
    • Manufacturer: Grotnes

    make: grotnes model: 15s infeed conveyor height: 27" conveyor minimum part width: 18" conveyor maximum part width: 23" infeed conveyor length: 30" outfeed conveyor length: 30" outside post distance...

  • Bliss 5012

    $49,000 - Watertown, CT, USA
    • Manufacturer: Bliss

    make: bliss model: 5012 peterson ddr66g roll feeder overarm drive die-draulic m5-1-12-ra deep drawing pressure pump clarktron rimfire 3 die protection system bolster plate w/ transfer set-up and kn...

  • MULTIPRESS (DENISON) WR87M HYD PRESS TK-19711

    $8,950 - Bethlehem, PA, USA
    • Manufacturer: Denison
    • Stroke: 12″

    stand handwheel adjustable stroke control pump: 7.5 gpm | size: 8 ton | motor: 7.5 hp | stroke: 12″ | throat: 7-1/2” | tonnage: 8 ton | bed size: 18″ x 11″ | daylight: 16” | ram press speed: 136 ip...

  • LELAND GIFFORD D73 #5945

    No price - Baltimore, MD, USA Recently Added
    • Manufacturer: Leland Gifford

    leland gifford 26" box column drill press with power down feed model:  d73 s/n:  6794 made in the usa read the leland gifford pdf specifications here specifications: drill swing:  26" throat:  13" ...

  • 1982 CINCINNATI 90-CB HYD PRESS BRAKE JV-20587TK

    $32,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Cincinnati
    • Stroke: 8”
    • Capacity: 90 TONS

    mild steel (over 1-1/8” vee die opening): 9’ x 10 gauge mild steel (over 2” die opening): 5’ x 1/4” full length dovetail slots across bed face, front & rear bed & ram machined for angle brackets fr...

  • C-FRAME HYDRAULIC STRAIGHTENING PRESS,

    No price - Cleveland, OH, USA Recently Added
    • Manufacturer: C-FRAME

    c-frame hydraulic straightening press, 16" throat 5 1/2"cylinder 15 1/2' bed area 2" thick steel fabrication 16" x 84" bed, 5 hp hydraulic unit, front support fixture, gage reads. 35 bar and 5,000 ...

  • C FRAME PRESS 100 TON HANNIFIN HYDRAULIC

    No price - Cleveland, OH, USA Recently Added
    • Manufacturer: HANNIFIN

    100 ton hannifin hydraulic c frame press floor standing bed area: 96" l-r x 21" f-b stroke approx.: 18" maximum throat depth: 15" ram diameter: 7.5" floor to top of bed: 41" power unit: vickers hy...