Used presses forging mechanical

- 68 listings found
Sort by Price: Low to High | High to Low
  • ZTS LE-250

    • Manufacturer: ZTS
    • Capacity: 250.00 ton 2491 kN

    Height listed is above floor total height is 142 inches (3610 mm)

    No price
    Washington, PA, USA
  • 1984 ZTS LE-400 Gap / C Frame Cold Press

    • Manufacturer: ZTS
    • Capacity: 400.00 ton 3985 kN
    • Stroke: 6.30 in 160.00 mm

    Throat size 18 inch (450mm), height shown is above floor level, number of strokes admitted per minute 20

    No price
    Washington, PA, USA
  • Kramatorsk K8546 Mechanical hot forging press

    • Manufacturer: Kramatorsk
    • Stroke: 400

    pot., tone: 4000 | weight, kg: 396,000 | total power, kw: 250 | slode stroke, mm: 400 | bed dimension, mm: 1620x1570 | overall dimension, mm: 6300x4850x7300 | min enclosed height, mm: 1000 | nr of slides stroke ...

    No price
    Veneto, Italy
  • 4000 TON MECHANICAL FORGING PRESS

    • Manufacturer: CHINA

      4000 ton mechanical forging press, in operation, good condition

      No price
      R
    • National MP 1600 Closed die forging presses

      • Manufacturer: National
      • Capacity: 1600 t
      • Stroke: 280 mm

      stroke: 280 mm | dimensions: 3100 x 3200 x 5100 mm | shut heigt: 762 mm | stroke rate: 70 min^-1 | table height: 1250 mm | total weight: 90 t | driving power: 73,6 kw / 380 v / 50 | lower ejector: 1 | upper ejec...

      No price
      Reinach, Switzerland
    • SPIERTZ 2500 TON FORGING PRESS

      • Manufacturer: SPIERTZ, Germany

        Capacity :2500 ton the press is under power in working condition

        No price
        Romania
      • Schuler Spiertz KH 1000 Cold forging presses

        • Manufacturer: Schuler
        • Capacity: 1000 t
        • Stroke: 700 mm

        stroke: 700 mm | shut heigt: 220 mm | total weight: 50 t | press capacity: 1000 t | mode of operation: mechanical

        No price
        Reinach, Switzerland
      • 1985 Voronezh AKKB8544 2500T Hot Forging Press

        • Manufacturer: Voronezh

          Maximum force ton-force, 2500 slider stroke length mm, 350 slider stroke length at maximum force mm, 0,1 unattainable-course mm, 10 number of courses of a slider per minute, 60 length of a rod mm, 1100 the closed...

          No price
          Lithuania
        • Bağlantı elemanları producion için komple hattı satmak için elimizdeki: perçin , cıvata , vida , somun...

          • Manufacturer: F.LLI FARINA

            Bağlantı elemanları producion için komple hattı satmak için elimizdeki : perçin , cıvata , vida , somun... (for sell complet line for production of nuts, screws, rivets, bolts..) phase 1. bar loader brand ficep 6...

            No price
            Spain
          • Hot forging press 2500tn voronezh akkd 8044

            • Manufacturer: Voronezh

              Nominal capacity, t 2500 slide stroke, mm 350 number of continuous stroke, min-1 55 number of single switches, min-1 18 die height, mm 995 adjustment, mm 15 table dimensions, mm left to right 1750 front to back 1...

              No price
              Russia