• Bliss 5012

    $49,000 - Watertown, CT, USA
    • Manufacturer: Bliss

    make: bliss model: 5012 peterson ddr66g roll feeder overarm drive die-draulic m5-1-12-ra deep drawing pressure pump clarktron rimfire 3 die protection system bolster plate w/ transfer set-up and kn...

  • Bliss 100 Ton Stamping Press, 3" Stroke, 12 5/8" Shut Height, 3" Slide Adj, Good Cond.

    $29,250 - Watertown, CT, USA
    • Manufacturer: Bliss

    bliss stamping press 100 ton capacity 3" stroke 3" slide adjustment 12 5/8" shut height (max) 60 spm 64" upper ram 72" lower ram bijur electric oil lube system eddy current ac variable drive motor ...

  • 3,150 ton Siempelkamp Hydraulic Stamping Press 23902

    No price - Rockville Centre, NY, USA Recently Added
    • Manufacturer: Siempelkamp

    weight: 300,000 kgs | force of air ejector: 40-800 tons | surface of moving table: 4,180 x 2,500mm | surface of lower press table: 4,000 x 2,500mm | force of back moving (max under 300 bar): 300 t...

  • 1996 300 ton Minster Used Stamping Press

    No price - Warren, MI, USA
    • Manufacturer: Minster
    • Capacity: 300
    • Stroke: 10"

    equipped with: link tonnage monitor minster programmable limit switch 6" bolster floor standing t-slotted bolster and ram minster servo feedline 26" x.350" max material thickness 20,000 lbs max coi...

  • 2007 1800 ton Schuler Used Stamping Press

    No price - Warren, MI, USA
    • Manufacturer: Schuler
    • Capacity: 1800 US ton
    • Stroke: 1100mm

    equipped with: rolling bolsters bed area: 3600mm x 2600mm | capacity: 1800 us ton | stroke length: 1100mm | strokes per minute: 8-20 | slide adjustment (powered): 530mm | shut height (above rolling...

  • Herman Schwabe 238-Ton Hydraulic Trim Press

    No price - Franklin, MA, USA
    • Manufacturer: Herman Schwabe

    platens 72" x 96", 75 hp motor & pump, (2) shuttle feed tables approx. 64" x 88"; (5 fisher st) equipment to produce acoustic insulation and interior trim products to the automotive industry

  • Herman Schwabe 238-Ton Hydraulic Trim Press

    No price - Franklin, MA, USA
    • Manufacturer: Herman Schwabe

    platens 72" x 96", approx. 25 hp motor & pump, (2) shuttle tables 64" x 88" (5 fisher st) equipment to produce acoustic insulation and interior trim products to the automotive industry

  • Hydraulic Press

    No price - Franklin, MA, USA

      60" x 36" feed table. (42 hayward) equipment to produce acoustic insulation and interior trim products to the automotive industry

    • 1998 Williams & White 100-Ton Down-Acting 4-Post Hydraulic Press

      No price - Franklin, MA, USA
      • Manufacturer: White

      stroke 72", daylight 84", between posts 72" x 102", nominal bed & platen 84" x 102", t-slotted bed & platen; operating speeds: fast close 200 ipm, pressing 3-35 ipm, fast open 200 ipm; 25 hp motor ...

    • 300 ton Danly 84"x48"" Used Stamping Press

      No price - Warren, MI, USA
      • Manufacturer: Clearing
      • Capacity: 300 ton
      • Stroke: 12"

      equipped with: floor standing air counter balance tie rod frame 6" t-slotted bolster light curtains allen bradley pv1000 control