• NIAGARA

    No price - Waukesha, WI, USA
    • Manufacturer: Niagara

    dual palm buttons air clutch and air brake 2 air cushions (never used) counter balances vibration pads arranged for knock outs floor standing over all machine in good condition

  • APT ZM-3150-25113

    No price - Waukesha, WI, USA
    • Manufacturer: APT

    age: 2000 | stroke: 19.69" (500mm) | tonnage: 354 tons | daylight: 31.5" | ram size: 51" x 98" | window size: 41.73" x 39.37" above bed | press weight: 97,000 lbs | return speed: 1182 ipm | closin...

  • BECKWOOD

    No price - Waukesha, WI, USA
    • Manufacturer: BECKWOOD

    4 post design inch, manual, auto cycle with counter electronic controls very little use!

  • K R WILSON MW-MD-15-3

    No price - Waukesha, WI, USA
    • Manufacturer: Wilson

    foot pedal operation adjustable bed height age: 1956 | top: 10 3/4" | next: 16 3/4" | lowest: 25 3/4" | serial#: 2016 | capacity: 15 ton | ram diameter: 4" | throat depth: 8" | ram stroke (max): 12"

  • 1973 USI CLEARING (TORC-PAC) 60T701

    No price - Waukesha, WI, USA
    • Manufacturer: Clearing

    wintress brake montior air clutch & brake cushion dual palm buttons runs good

  • 1969 USI CLEARING 75 TON O.B.I.

    No price - Waukesha, WI, USA
    • Manufacturer: Clearing

    wintriss wpc 2000 clutch/brake control shadow vii safety light curtain cushion single geared press with friction clutch dual palm buttons box type slide barrel-type slide adjustment

  • LEWIS

    No price - Waukesha, WI, USA
    • Manufacturer: Lewis

    floored mounted hydraulic hold down roll hydraulic mandrel expansion full radius riser blocks **originally used as a take up reel for a slitting line**

  • 2003 Stamping and bending machine WEBER DFM 1500

    No price - Grebenau, Germany
    • Manufacturer: Weber

    constr. year 2003 wire diameter range: 3.0 to 10.0 mm strip metal width: max. 100 mm feeding length: max. 800 mm * with knuckle-joint-press 250 kn *

  • 2003 Stamping and bending machine WEBER DFM 1500

    No price - Grebenau, Germany
    • Manufacturer: Weber

    constr. year 2003 wire diameter range: 3.0 to 10.0 mm strip metal width: max. 100 mm feeding length: max. 800 mm * with knuckle-joint press 250 kn *

  • 1974 Stamping- and bending machine BIHLER GRM 50

    No price - Grebenau, Germany

      constr. year 1974 equipped with: two slide units 1 eccentric press 250 kn working range: wire diameter range: 0,5 - 5,0 mm strip metal width: max. 70 mm feeding length: up to 320 mm output: 132 / min