• Waterbury Farrel 1510 ICOP Transfer Press with Air Clutch and Brake

    $15,500 - Watertown, CT, USA Recently Added
    • Manufacturer: Waterbury

    roll feed p/a scrap chopper strip and release system driven off the side shaft 3 9/16” total stroke of the press 6 stripper forks waterbury twin disc clutch with friction brake 7.5 hp duel voltage ...

  • Waterbury Farrel 2012 ICOP Transfer Press Square Plunger - Nice

    $74,900 - Watertown, CT, USA Recently Added
    • Manufacturer: Waterbury
  • Hannifin S-201A

    $6,500 - Morrisville, PA, USA
    • Manufacturer: Hannifin

    20 ton hannifin s-201a gap frame hydraulic press serial#: c-78199 with cabinet of tooling ticket: 20749 - 20750 preliminary specifications subject to ditional information will be posted as it becom...

  • Platarg 312 eyelet transfer press, 13 stations, 3 tons per station, Stroke 60mm #3491

    $54,900 - Connecticut, United States
    • Manufacturer: PLATARG
    • Stroke: No

    asset description notes: platarg 312 eyelet transfer press stations 13 capacity 3 tons per station stroke 2-3/8"(60mm) depth of draw 1-1/16"(27mm) ram pitch 2-1/2"(63mm) motor 10hp speed 70-210 str...

  • Waterbury Farrel 1510, deep draw transfer press, 3-9/16" Stroke. #1575

    $28,500 - Connecticut, United States
    • Manufacturer: Waterbury
    • Stroke: No

    asset description notes: waterbury farrel 1510, transfer press medium stroke 3.56" max draw 2.060" transfer slide standard blank set standard die holders bijur auto luber roll feed and mechanical c...

  • 1991 ASAHI SEIKI TP25 Eyelet & Transfer press, 3" stroke, 9 stations, Stripper Relief, Super Nice machine #3509

    $125,000 - Connecticut, United States
    • Manufacturer: ASAHI SEIKI
    • Stroke: No

    asset description notes: asahi seiki tp-25 transfer press stroke 3"(76.2mm) tonnage 25 year 1991 shut height 10"(254mm) stations 9 spm 50-200 die protection probe box strip feed strip and release m...

  • 1986 1200 ton Komatsu Transfer Press

    No price - Warren, MI, USA Recently Added
    • Manufacturer: Komatsu
    • Stroke: 600mm

    equipped with: rolling bolsters (2) : front to back bolster thickness: 300mm (die cution) 1pad 1 cylinder diecuhion stroke:250mm die cushion capacity: 1station;60ton, 2~5 station, 35ton (transfer d...

  • 1979 1200 ton Fukui 4.7x2m Transfer Press

    No price - Warren, MI, USA Recently Added
    • Manufacturer: Fukui
    • Stroke: 550 mm

    stroke: 550 mm | tonnage: 1200 | bed area: 4700 mm x 2000 mm | slide area: 4500 mm x 1900 mm | shut height: 1100 mm | die cushions: qty 5 | condition info: very good | rolling bolster: 2 front to ...

  • 2012 P.E.W.E. DeWater Systems DBP-705

    $29,500 - Cleveland, OH, USA
    • Manufacturer: P.E.W.E. DeWater Systems

    2012 - p.e.w.e dewater systems belt filter press model dbp-705 stainless steel feed pan nominal capacity .5 - 3cu meters/hr approximately .5 meter wide belts with .75hp and 2hp 230/460v belt motor...

  • Rodgers TCM-AX200-3024B 4 Post Transfer / Compression Moulding C69980

    No price - Washington, PA, USA
    • Manufacturer: TCM
    • Capacity: 200.00 ton 1995 kN

    press can be configured with main ram on top or bottom, secondary ram stroke 19 inch (482 mm), secondary ram diameter 4 inch (100 mm), daylight: 46 inch (1168 mm), table height 60 inch (1524 mm), o...