- Manufacturer: COLOMBO R
Line consisting of: top/bottom glue spreader disc conveyor capacity 1400 mm throughfeed press with platen size 1400 x 4400 mm platen thickness 38 mm specific pressure on 80% of the surface: ca. 5 kg/cm2 downstrok...
For the joining of veneers with thicknesses 0,4 up to approx. 3 mm. the joining medium is a glue impregnated thread which is applied in zig-zag or in a wavy line accross the joints of the veneer sheets by means ...
- Manufacturer: ORMA
Cold press press platen sizes: 2,50 x 1,30 m. split into 2 separate tables max. daylight 64 cm motor hydr 2,2 kw 8 upstroke rams, diameter 70 mm
- Manufacturer: IMA
88lmrxzgvthe machine is equipped: feed 16m / min; electromotive height adjustment of the overpressure, roller overpressure; feed-in; joining machine 2x 3kw; preheat heaters 1,5 kw gluing part for pur, glue specif...
- Manufacturer: Festo
Special machine festo used machine weight of the machine ca.: 1,00 t this is an automatic assembly machine for pressing of plastic closures in plastic threaded lid . ( for plastic bottles ) description of assembl...
- Manufacturer: Kuper
Â kuper fw 630 veneer gluing machine data: throat 630 feed m / min 15 m / min veneer thickness about 0,4 - 2,0 mm operating voltage 230/50 v / ph / hz up dimensions 89 x 365 weight 31 kg description for the joini...
- Manufacturer: JOOS
Pressing surface: 2500 x 1250 mm pressure through 14 flexible pressure tubes pressure between 1 and 1.5 kg / cm² 2 electrically heated press plates working temperature 100 ° c
Usefull sizes: 3 x 2 m 3 vertical beams 2 horizontal rams hydraulique power pack
- Manufacturer: SCHAFBERGER + SPRÖDHOBER
Vertical edge joint glueing press length: 3500 mm usefull height: 1500 mm. usefull thickness: 100 mm. 4 vertical hydraulic rams 2 frontal pneumatic clamps, movable over the length of the press
- Manufacturer: RAMARCH
Max workpiece length: 2640 mm max workpiece height: 1400 mm width workpiece: 600 mm pneumatic pressure units 5 top units with 2 cilinders 3 lateral units with 2 cilinders
- Manufacturer: SIPA
Usefull sizes: 3 x 2 m 3 vertical beams 2 horizontal rams
- Manufacturer: Habasit
Hot-pressing device for flexproof final compound of habasit tapes and belts up to a width of 100 mm and a thickness of 2.5 mm. the lower press plate is heated and has a built-in fuse and a temperature controller....
Get email updates for pressing and joining machines