Building Filters
- Trusted Seller
1994 KAISER KSTU ZA 2000-15P Ref No: 43706
- Manufacturer: Kaiser
+ Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data s...
Niederhelfenschwil, Switzerland - Trusted Seller
1977 PLATARG 611 Ref No: 43685
- Manufacturer: PLATARG
A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...
Niederhelfenschwil, Switzerland - Trusted Seller
1969 PLATARG 312 Ref No: 40583
- Manufacturer: PLATARG
This machine can have the following installed/added to it (not included) o new lubrication o new electrical installation o new protections o CE conformity Number of station 13 (12+1). Capacity on any one station ...
Niederhelfenschwil, Switzerland - Trusted Seller
2000 BENELLI 650T/3MR/2/12/3750X1100/LD/ET3 Ref No: 48090
- Manufacturer: Benelli
Press equipped with 2 feeing lines - one from the side for blank cutting in transfer mode and one in line for for progressive die operation.
Niederhelfenschwil, Switzerland - Trusted Seller
2007 SCHMID HSR400 Ref No: 51084
- Manufacturer: Schmid
- Model: HSR400
including coil line SARONNI with direct feed - hydraulic opening for cleaning - band guides at outlet - proportional pressure reducer for drive rollers
Niederhelfenschwil, Switzerland - Trusted Seller
FEINTOOL GKP 250 Ref No: 38885
- Manufacturer: FEINTOOL
Complete refurbished fineblanking press: * disassembly into individual parts * findings of all components (crack test) * overhaul of the drive * overhaul of the guides * overhaul of the impression cylinders * ove...
Niederhelfenschwil, Switzerland - Trusted Seller
1987 PLATARG 912 Ref No: 43443
- Manufacturer: PLATARG
Standard Flat Plate Lifter Cams 13 Stations, 12 Rams + 1 Slave 6.50" (165 mm) long Stroke - checked and confirmed 3.11" (79mm) depth of draw Wedge Adjustable Rams with Standard Male Thread Tool Holders Platarg st...
Niederhelfenschwil, Switzerland - Trusted Seller
2007 FEINTOOL (SCHMID) HSR 1000 ECO Ref No: 49997
- Manufacturer: Schmid
SIEMENS S7 300 controls Control Panel SIEMENS Panel PC 477B Switch on hours acc. to counter : 62'000 h Total strokes acc. to counter: 3 Mio including Coil line SCHMID HR 12
Niederhelfenschwil, Switzerland - Trusted Seller
1987 FEINTOOL HFA 320 Ref No: 42362
- Manufacturer: FEINTOOL
Object: 42362 | Last overhaul: 2019 | Drive system: hydraulic | Total force (nominal): 320 to | Stroke: 30 mm | Stroke rate (max.): 80 /min | Nominal force: 160 to | Lower table (left-right): 630 mm | Lower...
Niederhelfenschwil, Switzerland - Trusted Seller
1986 FEINTOOL GKP F 250 Ref No: 42820
- Manufacturer: FEINTOOL
Combination table Object: 42820 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 250 to | Stroke: 15 mm | Stroke rate (max.): 60 /min | Nominal force: 75 to | Lower ta...
Niederhelfenschwil, Switzerland - Trusted Seller
1971 FEINTOOL GKP F 50/80 Ref No: 36213
- Manufacturer: FEINTOOL
Example of an overhauled Feintool GKP 50/80 which can be applied to a machine we have in stock
Niederhelfenschwil, Switzerland - Trusted Seller
1981 FEINTOOL GKP F 40 Ref No: 32359
- Manufacturer: FEINTOOL
Object: 32359 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 40 to | Stroke: 45 mm | Stroke rate (max.): 90 /min | Lower table (left-right): 280 mm | Lower table (f...
Niederhelfenschwil, Switzerland - Trusted Seller
2002 FEINTOOL HFA 8800 PLUS Ref No: 36813
- Manufacturer: FEINTOOL
Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Returning velocity: 200 mm/s | Nominal force: 6...
Niederhelfenschwil, Switzerland - Trusted Seller
1978 FEINTOOL GKP F 250 Ref No: 48186
- Manufacturer: FEINTOOL
Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...
Niederhelfenschwil, Switzerland - Trusted Seller
1972 FEINTOOL GKP F 100/160 Ref No: 49648
- Manufacturer: FEINTOOL
Object: 49648 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 160 to | Stroke: 13 mm | Stroke rate (max.): 72 /min | Nominal force: 50 to | Lower table (left-right):...
Niederhelfenschwil, Switzerland