• 1994 BAKER A BAND SAW (HORIZONTAL RESAW) [RB-010364]

    $9,500 - United States
    • Manufacturer: Baker

    baker a bandsaw horizontal resaw -- single head re-saw, 15 hp tefc motor, 6" wide x 12" high material capacity or 8" wide x 4" high above the blade with conveyor set a 0ã‚â°. -- equipped with: sp...

  • 2011 BAKER DX BAND SAW (HORIZONTAL RESAW) [RB-010362]

    $19,900 - United States
    • Manufacturer: Baker

    baker dx thin kerf horizontal resaw;with a resawing capacity of 16" x 16". -- saw is driven by a 40 hp motor; 10 hp feed motor from 10 - 60 fpm, variable speed controller. -- dynamically balanced...

  • 1991 BAKER C-4 HEAD MULTI-HEAD RESAW [RB-010365]

    $32,900 - United States Recently Added
    • Manufacturer: Baker

    baker c 4-head horizontal resaw with return;6" wide x 12" high capacity re-saw. -- standard spring blade tensioning system; 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings. -- quick & ea...

  • BREWER BR 413 BAND RESAW (HORIZONTAL 2-HEAD) [RB-010366]

    $14,750 - United States Recently Added
    • Manufacturer: BREWER

    horizontal (2) head band saw cap: 8" x 11" wide (2) 20 h.p saw motors. (1) 10 h.p hyd pump motor.comes with product return belt.

  • 1987 DOLEDENE MARK II 38 BAND SAW (RESAW) [RB-010016]

    $8,550 - United States
    • Manufacturer: Ideal

    38" dia. wheel, 50 hp motor band resaw; wheel width 3-1/2" face, 4" w x 19' blade capacity; 38" saw pulley diameter. -- machine stands at floor level and has a base 65" x 36". -- saw line to fenc...

  • 1983 FILER & STOWELL 6 FOOT VERTICAL RESAW SYSTEM [RB-010038]

    $141,750 - United States
    • Manufacturer: FILER & STOWELL

    6' vertical resaw system with merry go round return rollcase. the unit was manufactured in 1983 and has been well maintained. powered by a 150 hp saw motor with maximum block size of 18" x 18". --...

  • TRI-STATE T-36-4 BAND RESAW [RB-010007]

    $19,750 - United States
    • Manufacturer: American

    tri-state 36" single-band tilting roll feed resaw, -- feed rolls tilt up to 45-degrees. -- feed speeds from 10 to 250 fpm. -- 3-1/2"-wide wheel for 4"-wide band or narrower. --maximum capacity ...

  • 1986 WADKIN PBR-HD BAND SAW (VERTICAL RESAW) [RB-280004]

    $7,250 - United States
    • Manufacturer: Wadkin

    wadkin pbr-hd vertical resaw;27-1/2" wheel dia., 10 hp - 3,600 rpm motor direct drives bottom wheel for 6,000 fpm blade speed. -- 3" max. band width and 16'- 2" min. to 16'- 8" max. length, 13" ma...

  • 1994 FOD DRPA-110 BAND RESAW (VERTICAL) [RB-010344]

    $14,900 - United States
    • Manufacturer: FOD

    fod drpa-110 vertical band resaw. -- equipped with: 44" wheel dia., 40 hp main motor, 17-3/4" max vert. cap., 17-1/4" max. spacing of feed rolls, 8-1/2" max. opening of feed rolls. -- 5 hp hydrau...

  • DANCKAERT 44 RESAW [RB-010036]

    $126,500 - United States
    • Manufacturer: DANCKAERT

    bandmill dankaertair strain 44� x 5� bandsawmcdonough center split feedworkswheel is supported on both sides not cantileveredthe guides are pressured guides and infeed rolls are mcdonoughmaximu...