brabender model pl-v3aa rheometer, s/n 2574-65, 440/3/60 volt operation, 20-186 rpm, mounted to a table stand
Ares Rheometer Rheometric Scientific LS-Ares Fluids Rheometer Test Station with LS-Areas Power Supply
- Manufacturer: LS
ares rheometer rheometric scientific ls-ares fluids rheometer test station with ls-areas power supply used
- Manufacturer: PM
ta instruments ares-ls1 rheometer test station. serial number: 4200-0022. unit comes with fluid bath option. 110-240v. geometries include: box vane tool 18mm od, 50 mm parallel plate, 25 mm separated base plat...
- Manufacturer: TA Instruments
used ta instruments carri-med labratory rheometer, model csl2500k autogap, benchtop design, serial# 401820a.
- Manufacturer: Kayeness
one (1) used kayeness melt point rheometer, model 2052, with printer, programmable, no computer
Brookfield DVIII Programmable Rheometer Brookfield DV-III , Cone Plate Version, requires circulating temeprature bath to control temeprature to within 0.1 celsius
brookfield dviii programmable rheometer brookfield dv-iii , cone plate version, requires circulating temeprature bath to control temeprature to within 0.1 celsius used, confirm which torque you need with torque r...
kayeness galaxy iii model 9052 capillary rheometer, 4.5" travel, touch pad controls, on mount pads, excellent condition
accuracy: 2% of reading | division: lab equipment | software: included | temp sweep: yes | temp sensor: built in | repeatability: 0.5% of the range | viscosity range: 0.2 ~ 100,000 m-pas | shear rate range: 0.5 ...
- Manufacturer: Metalchem Rheometer
rubber testing devices metalchem rheometer wg 02 used machine rheometer used, in very good condition. more information
- Manufacturer: Thermo
here we offer a haake rheometer. the thermo scientific haake rheostress 6000 is the new generation of the thermo scientific haake rheostress series, which focuses on standard applications in research & developmen...
rt 20 rheometer from haake with oscillatory shear heat up to 200 c (parallel plates) the machine is about 10 years old model rt20 technical specification max. torque (mnm) 100 min. torque (mnm) 8.00e-02 max. revo...
- Manufacturer: Dynisco
used dynisco capillary rheometer, model 35052m-115, with kayness model 121oakz-2k-b unit (spare included), with controls and 1 kg calibration weight, 115 volt, serial# 9707-447. less software and computer.
- Manufacturer: Brabender
used brabender rheometer, single screw extruder and prep mixer, with control .75" brabender single screw extruder (model 2503) 3 barrel zones water cooled, comes with temperature control panel 4 zones, amp meters...
Get email updates for rheometers