Used robot controllers in Neuchâtel, Switzerland

1995 CHARMILLES ROBOFORM 4000 – Die Sinking EDM machine + ROBOT QCR

• Manufacturer: Agie - Charmilles
• Model: Roboform

CHARMILLES ROBOFORM 4000 – 1995 Die Sinking EDM machine + ROBOT QCR Chuck type: Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank h...

TECHNOSOFT iPOS4850 BX-CAT-STO 11-60V 64A 3kW EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless and DC brush motors Motor supply / logic supply / STO supply: 11 – 60 VDC / 9 – 36 VDC / 15 – 36 VDC Output current: 64 A (45ARMS) nomin...

Shimada 2SI8 MK-II

• Manufacturer: Shimada-Kitako

ROBOTIZED CNC MULTISPINDLE MACHINING CENTER door opening and closing in less than 2.2 seconds robotized loading/unloading. Equipment : 2 spindles and a 10-12 station turret, including 5 or 6 motorized stations, Y...

Infinite® F50 Plus and Infinite F50 Robotic

Reliable. Validated. Compact. The Infinite F50 Plus and Infinite F50 Robotic are Tecan’s family of reliable, validated and compact absorbance microplate readers for ELISA. They provide accurate, fast photometric ...

TECHNOSOFT iGVD71 BX-CAN 11-80V 100A 8KW CANopen/TMLCAN

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless and DC brush motors Motor supply / logic supply / STO supply: 11 – 80 VDC / 9 – 36 VDC / 18 – 36 VDC Output current: 100 A (71ARMS) nomi...

TECHNOSOFT iGVD71 BX-CAT 11-80V 100A 8KW EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless, DC brush motors Motor supply / logic supply / STO supply: 11 – 80 VDC / 9 – 36 VDC / 18 – 36 VDC Output current: 100 A (71ARMS) nominal...

Shimada Kitako 2SI6-8-10-12

• Manufacturer: Shimada-Kitako

ROBOTIZED MULTISPINDLE MACHINING CENTER The 2SI models uniquely connect two spindles, a turret and a Fanuc controller in a highly productive, cost-effective machine tool package. Each model provides an easily cus...

TECHNOSOFT iPOS4850 BX-CAN-STO 11-60V 64A 3kW CANopen/TMLCAN

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless, DC brush and step motors Motor supply / logic supply: 11 – 60 VDC / 9 – 36 VDC Output current: 64 A (45ARMS) nominal; 90 A (64ARMS) pea...

LK Machinery TC-510/710/1200

3-axis machining center, with 4th and 5th axis option. - Mitsubishi NC (Siemens or Fanuc option) - X stroke from 510 to 1200 - Table from 650 to 1350 - Tool magazine from 16 to 20 tools (depending on model) - Opt...

Mylas T42-52-60 DSY

CNC LATHE - BARS - LOPIN with robotization option - automation CNC Fanuc Bi-spindle, 1 turret of 12 positions with Y axis

Mylas GT42-52

CNC LATHE - BARS - LOPINS With robotization option - automation CNC Fanuc Dual spindle, 1 turret with 12 positions with Y axis and 4 additional front tools Pilot tailstock in option

Mylas DY52

CNC LATHE - BARS - LOPINS With robotization option - automation CNC Fanuc Lathe with 2 Y axes. Bi-spindle, 1 turret of 12 positions with 19 additional front tools.

Mylas DY42

CNC LATHE - BARS - LOPINS With robotization option - automation ▶ 2 Y axes ▶ Bi-spindle ▶ 1 BMT 45 turret with 12 motorized positions ▶ 19 additional front tools ▶ Fanuc CNC ▶ Ø 42 mm

Mylas DT65

DT65 With robotization option, automation ▶ Bi-spindle lathe▶ Bi-turret BMT 45 with 12-tool Y-axis turret▶ 8-tool rear turret.▶ Adapted kinematics to reduce your cycle times▶ CNC Fanuc▶ Ø 65 mm

Mylas MTY51-65

MYTURN MTY51 / MTY 65 MULTI-SPINDLE TURNING CENTER, diameter 51 or 65 mm DUAL-SPINDLE, SINGLE-TURRET WITH THREE CHANNELS TWIN-SPINDLE, TWIN-TURRET WITH THREE CHANNELS Sectors of activity : Aerospace Automotive El...