• 11.5 x 18 ft.Marcy Rod Mill GM197

    No price - Bellingham, WA Recently Added

      11.5 x 18 rcy rod mill – one piece shell, 2″ thick – steel liners – 2 piece single helical ring gear 20″ faces, 229 teeth – pinion gear assembly, 19 tooth, 20″ face – 60″ main bearings, with bronze...

    • 10 – 6 x 14 Dominion Rod Mill GM150

      No price - Bellingham, WA Recently Added

        10 ft 6 in’ x 14 ft’ dominion rod millmill is complete and still installed on site – equipped with sr26 dominion gear box – bull gear 324 teeth – pinion gear 31 teeth – trunnions good – bull gea...

      • 9 – 6 x 12 Hardinge Rod Mill GM155

        No price - Bellingham, WA Recently Added
        • Manufacturer: Hardinge

        9 ft 6 in x 12 ft hardinge rod mill – disassembled – 500 hp 575v synchronous motor – air clutch – bull gear and pinion good condition – new spare bull gear – new set of brass inserts for bearings –...

      • WATERBURY-FARREL 10 STAND ROD MILL

        No price - Newark, NJ
        • Manufacturer: Farrel
        • Capacity: 4,000 LBS. (1815 KG)

        specifications -manufacturer: waterbury farrel corp. -type: 10 stand cross head with inverted block -capacity -maximum start size: .781" (19.8mm) dia. -minimum finish size: .300" (7.62mm) modifi...

      • BUEHLER, 6 STAND TANDEM ROD MILL

        No price - North Branford, CT
        • Manufacturer: Buehler

        manufacturer: buehler redex buehler 6 stand rolling mill enter 16 mm finish 8 mm sq year of mfg. 1970s with coiler 1 to 1.5 tons per coil last used to roll 15.5 mm brass rods to 8 mm modified sq.

      • WIRE ROD MILL, NEW 2007, 200,000 TONS/YEAR, 6 - 30MM

        No price - North Branford, CT

          machine# 12837 specifications: wire rod mill product diameter: 6mm - 12mm off finishing stand product diameter: 30 mm off intermediate stand capacity: 25 ton/hr. = 200,000 ton/yr. year of manufac...

        • 9 x 12 ft. Allis Chalmers Rod or Ball Mill w/ 400 hp GM225

          No price - Bellingham, WA Recently Added
          • Manufacturer: Allis-Chalmers

          9 x 12 ft. allis chalmers rod or ball mill w/ 400 hp – herringbone (1 piece) bull gear, 302 teeth, 20 in. face – herringbone pinion, 30 teeth, 20 in. face – westinghouse 400hp, 750 rpm, 575 volts –...

        • 2011 Giddings & Lewis FTR-5000 CNC FLOOR-TYPE BORING MILL W/TILTING SPINDLE RAM

          No price - Detroit, MI
          • Manufacturer: Giddings & Lewis
          • Spindle Diameter: 7.1″

          7.1" g&l ftr5000, siemens 840d, 157" cross, 137" vert, 100 hp, 60 atc, therm comp, prep f/cts, 50 tap., tilt ram, probe, chiller, 2011 manufactured in 2011 equipped with: siemens 840d cnc control s...

        • 12" (305mm) x 36" (914mm) W., STANDARD, 2-HI ROD MILL,

          No price - North Branford, CT
          • Manufacturer: STANDARD MACHINERY CO. (USA)

          machine# 12947 specifications: manufacturer: standard machinery co. (usa) type: 2-hi rod mill with grooved rolls direction of travel: reversing roll size: ...

        • 12" (305mm) x 28" (712mm) W., STANDARD, 2-HI ROD MILL,

          No price - North Branford, CT
          • Manufacturer: STANDARD MACHINERY CO. (USA)

          machine# 12946 specifications: manufacturer: standard machinery co. (usa) type: 2-hi rod mill with grooved rolls direction of travel: reversing roll size: ...