• Pexto 3418 Plate Bending Rolls

    No price - Venetia, PA, USA Recently Added
    • Manufacturer: Pexto

    4´ x 16 ga pexto plate rolls stk# 1503a model 3418 s/n 9/57 48" max width 16 gauge thickness initial pinch drop end 3" diameter rolls rolls are grooved for angles and tube foot pedal forward and r...

  • 2000 Tauring Angle Bending Roll Delta 50H

    $8,950 - Elk River, MN, USA
    • Manufacturer: Delta

    comments: round tube - size: 3.15” x .080” / min. radius 44” square tube - size: 2.3” x 2.3” x .2” / min. radius 51” flat bar (hard way) - size: 3.15” x .60” / min. radius 35” flat bar (easy way) ...

  • Somo Angle Bending Roll #2548

    No price - Ronkonkoma, NY, USA
    • Manufacturer: Somo

    somo angle bending roll 4" x 4" x 3/8" angle bending capacity specifications: driven shaft ...................... 120 mm diameter 400 mm length tooling dims ............... 450 mm od x 180 mm wide ...

  • 2013 G and H ROLL OFF Containers

    No price - Rochester, NY, USA
    • Manufacturer: G and H

    chassis - 2013 peterbilt 365 paccar mx 455@1900 1650@1100 fuller rto16908ll 10 speed 20,000 lbs front axle 22,000 lbs steerable 46,000 lbs tri drive rear axle power doors, adjustable steering drive...

  • 1990 5" x 5" x 1/2" CURVATRICI CS3 130H Angle Bending Roll

    No price - Helena, AL, USA Recently Added

      model: cs3 130h s/n: 13011 year: 1990 5" x 5" x 1/2" horizontal & vertical planes 21 kw 440v 60 hz 3 ph overall size: 7'w x 7'l x 6'h weight: 3100 kg *see attached warranty, terms, machine use and ...

    • BO234I 8" X 8" X 1" HERKULES ANGLE BENDING ROLLS

      No price - Holland, OH, USA
      • Manufacturer: Herkules

      serial .................... 68030 model ..................... bo234i angles leg out ............ 8" x 8" x 1" @ 120" angles leg in ............. 4" x 4" x 5/8" @ 40" plates on flat ............ 12"...

    • 14' x 5" Verrina, Hyd., 43" Top Roll, 26" Bottom Roll, 605 HP

      No price - Chicago, IL, USA
      • Manufacturer: SEC
      • Weight: 330 Ton

      (1) used 14' x 5" verina 3-roll hydraulic plate bending roll, model csl3/110x4580, new 1983 for bending and pre-bending edge of cylindrical and conical cowling, and straight...

    • Offset Rolls: Webb M2P, 2 Roll, 1/4" Cap., 6" - 30" Dia., 5 HP

      No price - Chicago, IL, USA
      • Manufacturer: Webb
      • Capacity: 1500 Lbs.
      • Weight: 4000 Lbs.

      (1) used webb offset bending rolls, model m2p, s/n 6888 f.o.b. chicago, il

    • Angle: 4" x 4" x 3/8" Tauring 2RT/100-H, Hyd., Horiz/Vert, Extra Guide Rolls

      No price - Chicago, IL, USA
        • Weight: 3700 Lbs.

        (1) used 4" x 4" x 3/8" tauring angle bending roll, model 2rt/100-h, s/n n/a foot switch operation hydraulic adjustment of upper roll (1) set of tooling for angles extra set of guide rolls two driv...

      • 2007 5" x 5" x 1/2" Imcar Comac Model CPHV-120 Angle Bending Roll

        No price - Elk Grove Village, IL, USA
        • Manufacturer: Optimum
        • Capacity: 5" x 1/2", leg-in 4" x 1/2"

        capacity: 5" x 1/2", leg-in 4" x 1/2" | flats easy: 8" x 2" 42 | angle leg-in: 4" x 1/2" 48 | construction: rugged, rigid, one piece solid steel weldment frame, normalized and precision machined, ...