• CONTOUR 8 STAND ROLL FORMER #17214

    No price - Nashville, TN, USA
    • Manufacturer: CONTOUR

    contour roll company 8 stand roll former model cr-1-m 1.5-8 8 stand shaft diameter 1.5" roll space 10" speed 30-90 fpm gear driven vertical range 4" horizontal centers 6" vertical adjustment: minim...

  • DAHLSTROM 12 STAND ROLL FORMER #17622

    No price - Nashville, TN, USA
    • Manufacturer: DAHLSTROM

    dahlstrom roll former model 250-12 ob 12 stand shaft | 1" roll range | 2.50" - 3.25" roll space | 6" horizontal centers | 5" speed | 60 - 180 fpm 440 volt 3 phase

  • DAHLSTROM 8 STAND ROLL FORMER #17623

    No price - Nashville, TN, USA
    • Manufacturer: DAHLSTROM

    dahlstrom roll former model 250-8 ob 8 stands shaft | 1" roll range | 2.50" - 3.25" roll space | 6" horizontal centers | 5" speed | 60 - 180 fpm stock travel l - r 440 volt 3 phase

  • TISHKEN 6-MW2 6 STAND ROLL FORMER #17856

    No price - Nashville, TN, USA
    • Manufacturer: Tishken

    tishken 6 stand #mw2 roll former model 6-mw2 number of stands | 6 spindle diameter | 2" roll space | 6" horizontal centers | 12" vertical adjustment | 2.5" base top to center lower spindles | 5" pu...

  • 16 STAND BONAK ROLL FORMER

    No price - Newark, NJ, USA

      roll space ......... 1250mm minimum thickness .. 0.5mm profiles 40 mini wave (p19), big wave (p40), (p54, pelfor (54 with fitting), 31 galvanized and pretreated sheet mandril uncoiler with hydrau...

    • 10 STAND SAMCO WEB/ACCESSORY ROLL FORMER WITH CUTOFF AND TOOLING, NEW 2002

      No price - Newark, NJ, USA
      • Manufacturer: Samco

      manufacturer - samco year - 2002 model - sg-210 serial number - 440628 number of stands - 10 arbor diameter - 2 roll space - 6" keyway - 3/8" max gauge thickness - 10 ga (.135") passline - 40" ...

    • Flagler Roll Former

      No price - Salt Lake City, UT, USA
      • Manufacturer: JMT
      • Weight: 500 lbs

      flagler roll former – capacity 20-26 gauge hem – depth of pocket ½” – extended shafts (for auxiliary rolls) – speed 45 fpm (approximately) – motor 2 hp, 1800 rpm – electrical 230/460 v. 3 ph. / 60 ...

    • Lockformer 8900 Roll Former

      No price - Salt Lake City, UT, USA
      • Manufacturer: JMT
      • Weight: 800 lbs

      lockformer 8900 roll former – capacity 24 – 28ga – stations 5 – depth of pocket 5/16″ – hammer over edge (adjustability) 3/8″ – forming speed 30-35 fpm – motor: voltage 115 phase 1 cycle 60 horsepo...

    • Flagler QF Roll Former

      No price - Salt Lake City, UT, USA
      • Manufacturer: JMT
      • Weight: 1200 lbs

      flagler qf roll former – capacity 22ga – speed (approximate fpm) 100 – drive belts (double matched ” v” belt) – motor: voltage 230 phase 3 cycle 60 horsepower 5 – dimensions: width 27″ length 68″ h...

    • 12 STAND ARDCOR F-15 PANEL ROLL FORMER

      No price - Newark, NJ, USA

        product: structural panel stand & track product range: 2 1/2" - 10" product thickness range: 14 ga max ardcor f-15 panel 12 stands 2.5" shaft 75 hp 230/460 volts 3 phase 1780 rpm motor 3/8" keyway...