search
  • 1987 FACCIN ROLLS

    $249,900 - Dodge Center, MN
    • Manufacturer: FACCIN
    • Capacity: 1.772"

    faccin (used) mdl 3hci 3-45/38 3 roll double pinch plate roll maximum length .................... 10' top roll diameter ................. 20.866" lower rolls diameter .............. 20.079" full le...

  • 1989 FACCIN 4HCI 2050 1116-002318

    No price - Hamburg, Germany
    • Manufacturer: FACCIN
    • Capacity: 14 mm
    • Weight: 11000 kg

    1 used 4 rolls bending machine faccin 4hci 2050 with following equipment: - operation panel with digital positiong display - hydraulic oil: shell tellus 4614s47735 - inductive hardened centre rolls...

  • 2006 FACCIN MA 50 Manipulator for dishing press

    No price - Visano, Italy
    • Manufacturer: FACCIN

    max. blank diameter mm 5.000 min. blank diameter mm 1.500 max. capacity kg 7.000 total power installed hp 25 blank rotation speed m/min. 25 up-down speed for support arms m/min. 12 volt...

  • 1995 FACCIN RCMI 150 150mm x 150mm x 15mm Hydraulic Double Pinch Section Bending Rolls.

    No price - Leicester, United Kingdom Recently Added
      • Weight: 7.8 ton / 7920 kgs

      width: 7'7" / 2311mm | height: 7'0" / 2134mm | length: 6'11" / 2110mm | square: 90mm | comments: ***video shows the machine under power*** | fitted with: 1 set of universal rolls | actuated via: f...

    • FACCIN ROLLS

      No price - Dodge Center, MN
      • Manufacturer: FACCIN

      faccin (new) model 4hel-3146 4 roll plate bending roll number of rolls ......... 4 geometry ................ linear slides maximum plate width ..... 120.08" roll diameter top roll .............. 18...

    • 2008 FACCIN HAV 3575 ROLL BENDING (PLATE 3-ROLL) [RQ-010074]

      $428,176 - United Kingdom
      • Manufacturer: FACCIN

      faccin 11.5' x 3-3/8" initial-pinch variable axis 3-roll hydraulic plate roller. -- equipped with: top roll 29-9/64", lower rolls 26", conical plate bending attachment, 150 hp motor and hardened r...

    • 1993 FACCIN ITALY 4 HCI 3050 x 48/40 PLATE BENDING MACHINE ROLL

      No price - Węglowice, Poland
      • Manufacturer: FACCIN ITALY

      faccin hydraulic 4 roll plate roll bender 4 roll bending machine faccin type 4 hcl 3050 x 48/40 with pre-bending manufacturer faccin itally new in 1993 the length of the roll 3000 mm max sheet thic...

    • Faccin HCU 1550 x 1 mm Bending rolls

      No price - Deinze, Belgium Recently Added
      • Manufacturer: Faccin HCU

      lower roll in polyurethane for perfect prebending automatic processing cycle (about 20 seconds/piece) special lower roll lifting system standard roll for minimum diameter output: 180/200 pieces per...

    • 1997 FACCIN 4 ASI 07/104 750mm x 4mm 4 Roll Double Pinch Hydraulic Bending Rolls

      No price - Leicester, United Kingdom Recently Added

        input: 415/3/50 ac 4 kw approx | width: 3'6" / 1.07m 2'8" / 813mm | height: 3'6" / 1.07m 3'6" / 1.07m | length: 8'2" / 2.49 hydraulic unit 4'2" / 1....

      • FACCIN ROLLS

        No price - Dodge Center, MN
        • Manufacturer: FACCIN
        • Capacity: 10'

        faccin (new) model hav314 variable geometry plate roll rated capacity,,,,,,,,,,,,,, 10' rolling 5 x d,,,,,,,,,,,,,,, 3-1/2" rolling 1.4 x d,,,,,,,,,,,,, 2-3/4" prebend 1.4 x d,,,,,,,,,,,,, 2" top r...