• 2006 Fasti Mechanical 3 Roll CNC Slip Bending Roll Model 134-5 / 2 9994

    • Manufacturer: Fasti
    • Capacity: .069” x 5’ MS to a 6” dia. with pre bend .078” x 5’ MS to a 6” dia. without pre bend .118” x 5’ MS to a 20” dia. with pre bend

    used fasti mechanical 3 roll cnc slip bending roll model 134-5 / 2 year 2006, stock no. 9994 suitable for forming cylindrical, elliptical and parabolic shapes as well as rectangulars and cones. capacity: .069” x...

    No price
    Warren, MI, USA
  • 2000 Eagle Angle Roll Model CP30P Capacity 1-1/2" x 1-1/2" x 3/16" 10114

    • Manufacturer: Capacity

      used eagle angle roll capacity 1-1/2" x 1-1/2" x 3/16", model cp30p year 2000, stock no. 10114 (mild steel) max size-od/wall min. dia. pipe: 1-1/2” sch 40 20” round tube: 2-3/8” x 16 ga. 40” square tube: 1...

      No price
      Warren, MI, USA
    • Peck, Stowe & Wilcox 3418 #15037A

      • Manufacturer: Peck

        model #:  3418 serial #:  9/57 48″ maximum width 16 gauge thickness capacity initial pinch drop end 3″ diameter rolls rolls are grooved for angles and tube foot pedal forward and reverse good condition 110 volt a...

        No price
        Monclova, OH, USA
      • 2015 Caterpillar D5K2LGP

        • Manufacturer: Caterpillar

          ultra low sulfur diesel fuel *d5k2 lgp tractor *engine,epa 4i,eu iiib,mlit 4 *drive, standard *hydraulics, 3 valve, standard *drawbar, standard *cab, rops *seat, cloth *sound suppression, omission *undercarriage,...

          $145,000 (USD)
          Elmhurst, IL, USA
        • 1975 - HKMZ 40x8000 8.0m 4 Roll Bender

              the rollers 4 roll nkmz 40x8000 mm. the rolls intended for bending steel sheet into cylindrical mantle and conical in hot or cold. the maximum thickness of the bending plate in the cold state, of 40 mm. the maxim...

              No price
              Vtoroye Mokhovoye, Russia
            • Flagler 20 Ga. High Speed Pittsburgh

              • Manufacturer: Flagler
              • Weight: 450 lbs

              pecifications: capacity: 20 to 26 guage depth of pocket: 5/16" width, on built in pittsburgh lock rolls, with adjustable hammer over edges. extended shafts: for standard aux. rolls. double seam, drive cleat, righ...

              No price
              Salt Lake City, UT, USA
            • 2017 PROD-MASZ ZGR-3140/0.8 ohne Rollenschere

              • Manufacturer: PROD-MASZ

                bending machines / press / sheet bending machine/schwenkbigemaschine zgr-3140mm / 08 mm without roll shears sheet-bending machines is in scala of degree of, roman screws, front schneidebegrenzter, rear rack, gas ...

                $1,196 (USD)
                Bavaria, Germany
              • Pullmax Z 41

                • Manufacturer: Pullmax

                  section bender pullmax z41 motorized rolls number : 3 engine power : 15kw rotation speed (rpm) : 6 ø shaft : 120mm corner capacity ø 1600 : 130 x 130 x 13mm plate on ø 1300 : 125 x 20mm ipn ø 1200 : 120 x 120 x 1...

                  No price
                  France
                • HESSE by BEKA-MAK BMSY 360 DGH Band sawing machines

                  • Manufacturer: BEKA-MAK
                  • Motor: 3 kW
                  • Weight: 1.390 kg

                  hydraulic vice digital readout  for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cuttin...

                  $16,125 (USD)
                  Wiener Neudorf, Austria
                • HESSE by BEKA-MAK BMSY 440 DGH Band sawing machines 6080

                  • Manufacturer: BEKA-MAK
                  • Motor: 3 kW
                  • Weight: 1.540 kg

                  hydraulic vice digital readout  for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cuttin...

                  $17,852 (USD)
                  Wiener Neudorf, Austria

                Have 5 seconds to help us improve the results?

                I'll do it
                No thanks