• BRANDT KD-77 2C Edgebander with Corner Rounding

    $13,950 - United States
    • Manufacturer: Brandt

    northwest us brandt kd-77 2c edgebander with corner rounding:1/2" (0.4 - 12 mm) edge cap., min. panel width 2-1/2" (65 mm), min. length 6-3/8" (160 mm), panel thickness min 5/16" (8 mm) to max 2" (...

  • SCM Olympic K203R 3mm Edgebander with Corner Rounding

    $6,900 - United States
    • Manufacturer: SCM
    • Weight: 3000 lbs.

    midwest 3mm capacity edgebander, with 6" color touchscreen control, teflon coated glue pot, (1) driven + (2) idle pressure rollers, two motor end trim unit riding on thk linear guides, two motor co...

  • CROSS 55 GEAR TOOTH CHAMFERING MACHINE

    No price - Warren, MI, USA
      • Capacity: 15 Gal.
      • Weight: 3,700 lbs

      equipped with: draw rod collet hydraulic unit lube system air gun coolant guards 460/3/60 electrics catalog specifications: maximum gear diameter: 18" maximum face width: 14" maximum pitch: ...

    • OTT Unimatic with Corner Rounding

      $9,500 - United States
      • Manufacturer: OTT

      southwest us 2006 ott unimatic tornado in good condition configured well for wide variety of edges including 3mm and hpl 15mm edge capacity  touch screen controller large pressure station 2 motor e...

    • Biesse Akron 246 w/Premill & Corner-Rounding (Used)

      $24,500 - United States
      • Manufacturer: Biesse
      • Weight: 2500 lbs.

      video rigger: not required | weight: 2500 lbs. | electric: 220 volt 60 cycle 3 phase | year of man.: 2007 | shipping footprint: 20 (length) x 4 (width)

    • Brandt KDF 530C Pre-Mill and Corner-Rounding (Used)

      $24,500 - United States
      • Manufacturer: Brandt
      • Weight: 2500 lbs.

      edge band thickness 0.4 � 8mm (0.016" - 1/4� ) coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (pvc) edgeband height 12 - 65 mm (1/2" � 2 9/16 ") panel length min. 160 mm (6 3/8") panel width min. 65 ...

    • Late Model Brandt Ambition 1120 (Premill+Corner Rounding)

      $38,500 - United States Recently Added
      • Manufacturer: Brandt

      southeast us 2013 brandt 1120!  workstations pre-milling unit; diamond tipped lh / rh cutter-heads, 2.2 kw (3.0 hp) motors.   front and rear end trimming:    (1/4 hp), 12,000 rpm motors ( chamfers ...

    • Holher/Tangent Corner Rounding Unit

      $3,000 - United States
      • Manufacturer: Holz-Her

      northeast us  this machine has been cleaned, checked, and is in full operating condition. handling panels up to 1 1/2" 3mm vinyl and solid wood capable. runs on air and is single phase 115v.

    • Brandt Edgebander w/ Double Corner-Rounding

      $32,500 - United States
      • Manufacturer: Brandt
      • Weight: 6000 lbs.

      northeast us click here for video video 2 video 3 edge band thickness 0.4 � 12 mm (0.016" - 1/2� ) coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (pvc) edgeband height 12 - 65 mm (1/2" � 2 9/16 ") p...

    • Brandt edge blander with corner rounding great buy!

      $20,000 - United States
      • Manufacturer: Brandt

      southeast us end trim top and bottom rough trim top and bottom fine trim 2 motor corner rounding profile scraping buffing