• GISHOLT 3L HEAVY DUTY SADDLE TYPE TURRET LATHE 18322

    No price - Des Plaines, IL, USA
    • Manufacturer: GISHOLT
    • Spindle Bore: 5-1/8"
    • Spindle Nose: A1-11

    age? fixed position turret ( not cross sliding ) preselector head for speed changes hardened bed ways power feeds and rapid traverse to carriage and turret 24" 4 jaw chuck square 4 way tool post 2 ...

  • Warner & Swasey 2A # SQUARE HEAD SADDLE TYPE TURRET

    No price - Holland, OH, USA
    • Manufacturer: Warner & swasey
    • Model: 2A

    serial ................................... 1888292 model #2a (m-3470) square head swing over bed ........................... 20" swing over carriage horn ................. 16-3/4" maximum distance ...

  • GISHOLT 3L Heavy Duty Saddle Type Turret Lathe

    No price - Houston, TX, USA
    • Manufacturer: GISHOLT
    • Spindle Bore: 5-1/8"
    • Spindle Nose: A1-11

    gisholt 3l heavy duty saddle type turret lathe s/n: 3329-7 new approx: 1953 specifications: swing over bed: 28.5" swing over carriage wing: 25.5" swing over cross slide: 21" end of spindle...

  • 1955 10 A Used Jones & Lamson Saddle Type Turret Lathe

    No price - Navasota, TX, USA
    • Manufacturer: Jones
    • Spindle Nose: A-11

    feeds: .005 to .100 i.p.r. | weight: 14,000 lbs. | coolant: yes | chuck size: 24" 4 - jaw | main motor: 40 hp. 440 | spindle hole: 6-3/4" | spindle nose: a-11 | condition info: very good | flange ...

  • 1971 3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

    No price - Navasota, TX, USA
    • Manufacturer: Warner & swasey
    • Spindle Nose: A-15

    equipped with: note: machine will have rear aprons and rapid traverse box reconditioned. rapid traverse drive box reconditioned, new bearings, in main motor. new feed and rapid shafts. headstock cl...

  • 16501 5" GIDDINGS & LEWIS TABLE TYPE HORIZONTAL BORING MILL 5T FRASER

    $24,500 - York, PA, USA
    • Manufacturer: Giddings & Lewis

    5" giddings & lewis table type horizontal boring mill price: under power in pennsylvania plant ……………... $24,500.00 hmc stock # 16501-n machine serial no. 150-777 machine model no. 5t fraser new da...

  • 1976 4A WARNER & SWASEY MODEL M3550 SADDLE TYPE TURRET LATHE 18155

    No price - Des Plaines, IL, USA
    • Manufacturer: Warner & swasey
    • Spindle Bore: 9"
    • Spindle Nose: A1-15

    #m-3550 full length leadscrew threading attachment hardened and ground bed ways cross sliding turret air operated 24" steel 4 jaw chuck 4 way tool post on carriage coolant system miscellaneous turr...

  • 1954 10 A Used Jones & Lamson Saddle Type Turret Lathe

    No price - Navasota, TX, USA
    • Manufacturer: Jones
    • Spindle Nose: A-11

    swing over bed ways 32" swing over cross slide carriage 22" center distance 70" spindle hole 6-1/2" spindle speeds 12 to 600 rpm's spindle nose a-11 chuck size 18" 3- jaw with 2 piece jaws feeds .0...

  • 1982 4 L Used Gisholt Saddle Type Turret Lathe

    No price - Navasota, TX, USA
    • Manufacturer: Gisholt
    • Spindle Nose: A-1-20

    weight: 25,000 lbs. | coolant: yes | chuck size: 24" 4-jaw | feeds long: .005 to 176 i.p.r. | main motor: 60 hp. 230 / 480 volts | feeds cross: .0025 to .88 i.p.r. | floor space: 238" x 72" x 64" ...

  • 4 L Used Gisholt Saddle Type Turret Lathe

    No price - Navasota, TX, USA
    • Manufacturer: FAIR
    • Spindle Nose: A-1-20

    weight: 25,000 lbs. | coolant: yes | chuck size: 24" 4-jaw | feeds long: .005 to 176 i.p.r. | main motor: 25 hp | feeds cross: .0025 to .88 i.p.r. | floor space: 308" x 72" x 64" v | spindle hole:...